Skip to main content

Solar-powered logging stud

Clearview Traffic has launched the M210 solar-powered logging stud, which the company claims is a unique and innovative solution for accurately counting vehicles on a wide range of roads. As the company points out, on roads which have no counting systems installed, long-term trends are often completely invisible. However, installing a wide network of loop-based traffic counters is often not economically practical due to the costs of installing and maintaining these devices.
June 27, 2012 Read time: 2 mins
557 Clearview Traffic has launched the M210 solar-powered logging stud, which the company claims is a unique and innovative solution for accurately counting vehicles on a wide range of roads. As the company points out, on roads which have no counting systems installed, long-term trends are often completely invisible. However, installing a wide network of loop-based traffic counters is often not economically practical due to the costs of installing and maintaining these devices.

Clearview Traffic's solution combines several technologies, including solar power, radio communications and magnetometer-based vehicle detection. The self-contained M210 solar-powered logging stud is installed into a 13cm diameter hole in the centre of the lane. Once installed, it can count any passing vehicles, recording data in one-minute intervals and storing it within the unit. An integrated solar panel provides power to a high-efficiency rechargeable battery to ensure continuous operation for many years without the need for any form of routine maintenance.

Since the device uses a magnetometer to detect vehicles, it is immune from problems associated with damage to loops including from road degradation, utility works or road repairs. This again reduces the need for road maintenance, with its associated cost and congestion. It is also unobtrusive and less likely to sustain damage from road users as is common with other types of beside-the-road counter.

In order to collect the data from the device, a specially designed radio dongle can be plugged into a USB port to wirelessly communicate to the M210 from up to 10m/30ft away. Data can then be collected, both simply and safely from the roadside, using a simple download application.

Related Content

  • March 19, 2014
    New opportunities in a data-rich future
    Jason Barnes looks at where the detection and monitoring sector is heading. In the future, there will be no such thing as an un-instrumented road. Just a short time ago, that could have been a quote from a high-level policy document but with the first arrivals of vehicles with 802.11p connectivity – the door-opener to Vehicle-to-X (V2X) applications – it’s a statement which has increasing validity. The technology which uses our roads will also provide information on road conditions but V2X isn’t the only
  • September 26, 2019
    Sign language reduces human error says Clearview
    Wrong-way warning systems and advanced queue detection can help to reduce human error. They can also cut road accidents – and therefore road deaths, says Clearview Intelligence Where were nearly 1,800 deaths on the UK’s roads in 2018 – an average of five people dying each day. The largest single cause of serious injury is crashes at junctions (accounting for 33% of incidents), while the largest single cause of death was run-off road crashes (30%) “With vehicles increasingly being designed with saf
  • February 8, 2016
    Accurate vehicle detection with Radix wired sensors
    Radix Traffic will be featuring at Intertraffic Amsterdam its wired magnetometer sensors, over 500 of which have been installed in the UK to provide accurate vehicle detection. Unlike conventional inductive loops, the sensors can be installed around 50cm below the road surface where they are protected from damage caused by bad weather and heavy traffic. Radix claims that once a sensor is installed it will continue to detect during its 15-year design life with no maintenance required. Radix says installat
  • April 5, 2016
    Radix Traffic features wired magnetometer sensors
    Radix Traffic will be featuring at Intertraffic its wired magnetometer sensors, over 500 of which have been installed in the UK to provide accurate vehicle detection. Unlike conventional inductive loops, the sensors can be installed around 50cm below the road surface where they are protected from damage caused by bad weather and heavy traffic. Radix claims that once a sensor is installed it will continue to detect during its 15-year design life with no maintenance required.