Accurate vehicle detection with Radix wired sensors

Radix Traffic will be featuring at Intertraffic Amsterdam its wired magnetometer sensors, over 500 of which have been installed in the UK to provide accurate vehicle detection. Unlike conventional inductive loops, the sensors can be installed around 50cm below the road surface where they are protected from damage caused by bad weather and heavy traffic. Radix claims that once a sensor is installed it will continue to detect during its 15-year design life with no maintenance required. Radix says installat
February 8, 2016 Read time: 2 mins
8326 Radix Traffic will be featuring at Intertraffic Amsterdam its wired magnetometer sensors, over 500 of which have been installed in the UK to provide accurate vehicle detection. Unlike conventional inductive loops, the sensors can be installed around 50cm below the road surface where they are protected from damage caused by bad weather and heavy traffic. Radix claims that once a sensor is installed it will continue to detect during its 15-year design life with no maintenance required.

Radix says installation is quick and simple and with no slot cutting involved, lane closure and traffic management is not normally required. For a growing number of access control and parking applications, the sensors are also being mounted either above or adjacent to entrance and exit ramps, delivering reliability and through-life cost benefits to car park operators and site owners.

As the company points out, being wired, this technology does not need regular battery replacement or costly wireless repeaters, and is rapidly becoming the detector of choice in countries as far apart as the UK and Australia.

Related Content

  • April 5, 2016
    Radix Traffic features wired magnetometer sensors
    Radix Traffic will be featuring at Intertraffic its wired magnetometer sensors, over 500 of which have been installed in the UK to provide accurate vehicle detection. Unlike conventional inductive loops, the sensors can be installed around 50cm below the road surface where they are protected from damage caused by bad weather and heavy traffic. Radix claims that once a sensor is installed it will continue to detect during its 15-year design life with no maintenance required.
    Read More
  • February 1, 2012
    Cost-effective alternatives to traditional loops
    Traffic signal control is a mainstay of urban congestion management. Despite advances in vehicle detection sensors, inductive loops, which operate by using a magnetic field to detect the metal components in vehicles, are still the most common enabler for intelligent signalised junctions.
    Read More
  • February 26, 2013
    Aberdeen opts for wireless vehicle detection
    After several years’ experience of loop detector failures, primarily identified as being caused by damage from roadworks or degradation of aging road surfaces, Aberdeen City Council opted to use the Golden River M100 wireless detection system from Clearview Traffic. Each compact M100 sensor is typically installed in the middle of a traffic lane where it detects the presence and passage of vehicles and communicates this information wirelessly to the traffic signal controller via an access point and contact c
    Read More
  • May 30, 2013
    Wavetronix radar-based traffic sensor cuts costs
    While initial cost of radar based detection may be higher than that traditional loops, lower maintenance costs more than balance the books. Following successful field tests, the US city of Greenville, North Carolina, has recently agreed a new policy of phasing in Wavetronix traffic sensor technology’s radar-based SmartSensor Matrix system across its signalised traffic intersections. City traffic engineer Rik DiCesare expects the incremental implementation to deliver benefits to both the city’s taxpayers an
    Read More

Highlighted Content