TinyMobileRobots launches tablet solution for road marker

Danish firm TinyMobileRobots is showing off a new tablet solution for its robot road marker at Intertraffic. The TinyPreMarker automatically lays out road lines – on motorways, airports or harbours - to an accuracy of 2cm, using a built-in GNSS receiver, the company says. Customers load the pre-marking course required on a programme such as AutoCAD. The product is compatible with CSV, DXF, GEO and LandXML data formats, which can then be transferred to the robot via USB, and the robot will then mark points
March 21, 2018 Read time: 2 mins
Size matters: Tiny Mobile Robots’ Lars Jøgensen

Danish firm 8701 TinyMobileRobots is showing off a new tablet solution for its robot road marker at Intertraffic. The TinyPreMarker automatically lays out road lines – on motorways, airports or harbours - to an accuracy of 2cm, using a built-in GNSS receiver, the company says.

Customers load the pre-marking course required on a programme such as AutoCAD. The product is compatible with CSV, DXF, GEO and LandXML data formats, which can then be transferred to the robot via USB, and the robot will then mark points or lines using an on-board aerosol spray.

The TinyPreMarker needs to be followed by a human, who can check visually that it is keeping to the right course and replace its aerosol if need be. The original product, launched in 2014, required a controller device with the robot – but the new solution means that customers need only an iPad or other tablet to do everything.

“It is totally autonomous and ten times faster than doing it manually,” says the company’s Lars Jorgensen. “We have sales all over the world: the US, Australia, Netherlands and Denmark, of course.”

Replaceable battery life is eight hours – and TinyMobileRobots says that it does not know of any customers which have had to use a back-up battery before that time. “We haven’t experienced that yet,” says development engineer Palle Flydtkjaer. Customers include surveying companies and others which have a need for high-volume road pre-marking work.

Stand: 6.106

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.tinymobilerobots.com TMR website link false http://www.tinymobilerobots.com/en/ false false%>

For more information on companies in this article

Related Content

  • Drive.ai self-driving tests with passengers in Frisco, Texas
    July 31, 2018
    Drive.ai is using self-driving vans to carry passengers on a near two-mile route in Frisco, Texas. According to a report by CBS News, the company is the first to launch such a test since an Uber vehicle driving in autonomous mode killed a pedestrian in Arizona. These vans will operate over the next six months, with a safety driver on board, and will travel between an office park and a nearby dining area and entertainment complex. Conway Chen, vice president at Drive.ai, says the service has been desi
    Read More
  • Uber may never be profitable … admits Uber
    April 12, 2019
    Private ride-hailing giant Uber, which is aiming to follow rival Lyft in becoming a public company this year, has warned that it may never be profitable. The candid admission comes in a filing to the US Securities and Exchange Commission (SEC) as Uber prepares for an initial public offering (IPO) which it reportedly hopes will value the company at $100 billion. This potential IPO figure is some way below the $120bn predicted by analysts just last year. And Uber warns: “We have incurred significant loss
    Read More
  • Bounce back with Berry’s spring steel buffer
    March 21, 2018
    Oops! Another small knock to your car in the car park. But thanks to the new spring steel buffer from Berry, it is the barrier that yields this time and not your vehicle’s bodywork. A key feature of the buffer is its deflection – typically around 300mm, according to Berry, part of the Hill & Smith group. This means that impact forces are absorbed by the buffers rather than transmitted directly to the mounting bolts or towards deformation of the railing system. They usually require one or two 20mm bolts.
    Read More
  • Designa displays parking hardware and software solutions
    March 20, 2018
    Designa is inviting visitors to Intertraffic to find out all about the world of parking with easy-to-operate hardware and software trends that make usage in the car park significantly easier for customers. The company is highlighting its innovative, integrated equipment and software solutions to further establish itself as a software specialist in the industry. Well known for its high standards, Designa is presenting a brand new cash register which the company claims is far beyond the ordinary. Visitors ca
    Read More

Highlighted Content