Bounce back with Berry’s spring steel buffer

Oops! Another small knock to your car in the car park. But thanks to the new spring steel buffer from Berry, it is the barrier that yields this time and not your vehicle’s bodywork. A key feature of the buffer is its deflection – typically around 300mm, according to Berry, part of the Hill & Smith group. This means that impact forces are absorbed by the buffers rather than transmitted directly to the mounting bolts or towards deformation of the railing system. They usually require one or two 20mm bolts.
March 21, 2018 Read time: 2 mins
Spring is in the air: James Fildes

Oops! Another small knock to your car in the car park. But thanks to the new spring steel buffer from 8708 Berry, it is the barrier that yields this time and not your vehicle’s bodywork.

A key feature of the buffer is its deflection – typically around 300mm, according to Berry, part of the Hill & Smith group. This means that impact forces are absorbed by the buffers rather than transmitted directly to the mounting bolts or towards deformation of the railing system.

They usually require one or two 20mm bolts. Embedment need be only 80mm and the pull-out loading is just 50kN. This is, in fact, a quarter the number of bolts needed at half the depth – which also saves on installation and repair time.

Officially called the RB1 buffer, it has a small footprint in the parking bay. Overall parking length is reduced only by the 100mm depth of the barrier.

However, sufficient free space must be available behind for barrier deflection.

A base plate can be used, if required, to spread the impact load on the buffer over a wider surface area to avoid damage to the substrate and to assist in levelling the buffer installation on uneven surfaces.

Stand: 1.202

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.berrysystems.co.uk Berry Systems website links false http://www.berrysystems.co.uk/ false false%>

Related Content

  • March 24, 2014
    Saferoads displays Omni Stop Bollard
    Australian firm Saferoads is offering an improved roadside protection product in the shape of its new Omni Stop Bollard. The product is suited to installations such as around construction workzones or pedestrian and commercial areas, where there may be site personnel or people congregating alongside a busy roadway. The Omni Stop Bollards can be spaced so as to allow free access for pedestrians or cyclists, while providing protection from errant vehicles.
    Read More
  • March 21, 2018
    Safer roads with the HV2 safety barrier from Saferoads
    The durability of a steel barrier and the ballasting weight of concrete come together in the HV2 hybrid freestanding temporary safety barrier from Saferoads. The HV2 is half the weight per metre of a typical concrete barrier, according to the Australian manufacturer Saferoads. The system has passed MASH TL-4, 10T at 90km/h completely freestanding with deflection of 2.2m. The company says that because of its size - 5.8m long and rotationally symmetrical – and that it needs no additional parts, the HV2 is
    Read More
  • March 20, 2018
    Bollards bounce back with Saedi’s Augustaflex
    Reducing the cost of replacing damaged or demolished traffic signs is the aim of Saedi’s Augustaflex technology, which is on show here. Even relatively minor impacts can damage street traffic signs or bollards to the point where they have to be replaced, at considerable cost to local authorities. And those signs that do not have to be replaced but sustain damage can spoil a streetscape.
    Read More
  • March 21, 2018
    Haenni shows lightweight solution for low-speed WIM
    The WL400 is a new portable low-speed weigh-in-motion (WIM) wheel load strip sensor which is making its first appearance at Haenni’s stand in hall 10. Designed for pre-selection of vehicles, the 80mm wide sensor has an accuracy of ±2% (excluding external factors) at speeds of up to 20km/h and a capacity of 30tonnes per axle.
    Read More

Highlighted Content