Sensys to supply pantograph monitoring for Swedish railways

Swedish traffic enforcement supplier Sensys Traffic has been awarded a contract worth US$0.4 million by the Swedish Transport Administration for the monitoring of train pantographs using its Automatic Pantograph Monitoring System (APMS). APMS is designed to identify damage to pantographs and prevent overhead power wires being torn down. The system uses non-contact technology to analyse the condition of pantographs as the train passes at normal operating speeds up to 250 km/h. Once installed, the sensor is
November 1, 2012 Read time: 1 min
Swedish traffic enforcement supplier 569 Sensys Traffic has been awarded a contract worth US$0.4 million by the 746 Swedish Transport Administration for the monitoring of train pantographs using its Automatic Pantograph Monitoring System (APMS).

APMS is designed to identify damage to pantographs and prevent overhead power wires being torn down.  The system uses non-contact technology to analyse the condition of pantographs as the train passes at normal operating speeds up to 250 km/h. Once installed, the sensor is designed to operate without interrupting train traffic, including during maintenance a service periods.

When damage is detected, the detector sends an alarm via Ethernet or GSM/3G to central control for verification and further actions. An alarm is sent within minutes of the passing event.

For more information on companies in this article

Related Content

  • I-80 Smart Corridor sets the ITS standard for California's Bay Area
    March 23, 2015
    Colin Sowman looks at California’s ‘smartest’ road which will open this spring to counter congestion and accidents on one of the Bay Area’s busiest interstates. Interstate 80 (I-80) is one of the busiest roads in the San Francisco Bay area with up to 270,000 vehicles using the corridor every day. The section between the Carquinez Bridge in Crockett and the Bay Bridge not only suffers congestion during the working week but also at weekends. Traditional remedies such as building additional lanes (there are al
    Read More
  • SafeRide: it’s time to act on cyberattacks
    May 10, 2019
    Cyber threats are increasing rapidly and conventional security measures are unable to keep up. Ben Spencer talks to SafeRide’s Gil Reiter about what OEMs can do now As more vehicles become connected, so the potential threats to their security increase. Gil Reiter, vice president of product management for security firm SafeRide, says the biggest ‘attack surface’ for connected cars is their internet connectivity - and the in-vehicle applications that use the internet connection. “The most vulnerable co
    Read More
  • IRD complements WIM with tyre under-inflation detection
    May 8, 2015
    To complement its existing WIM offering, IRD has introduced a system to detect under-inflated and flat tyres at highway speeds. Tyre inflation pressure has both safety and economic impacts for road users and none more so than with commercial vehicles. An underinflated tyre has decreased directional control, increased risk of catastrophic failure, and negatively impacts tyre life and fuel economy. In June 2014 the USDOT published Large Truck and Bus Crash Facts 2012 in which the Federal Motor Carrier Safety
    Read More
  • Accurate vehicle detection with Radix wired sensors
    February 8, 2016
    Radix Traffic will be featuring at Intertraffic Amsterdam its wired magnetometer sensors, over 500 of which have been installed in the UK to provide accurate vehicle detection. Unlike conventional inductive loops, the sensors can be installed around 50cm below the road surface where they are protected from damage caused by bad weather and heavy traffic. Radix claims that once a sensor is installed it will continue to detect during its 15-year design life with no maintenance required. Radix says installat
    Read More

Highlighted Content