J-J Hooks barrier system passes demanding crash tests

Easi-Set Worldwide has announced that its J-J Hooks barrier system has successfully passed both bolted-down and pinned-down MASH Test Level 3 crash tests (MASH - Manual for Assessing Safety Hardware), out-performing other comparable systems. The tests were performed by the Texas Transportation Institute.
June 19, 2012 Read time: 1 min
5948 Easi-Set Worldwide has announced that its J-J Hooks barrier system has successfully passed both bolted-down and pinned-down MASH Test Level 3 crash tests (MASH - Manual for Assessing Safety Hardware), out-performing other comparable systems. The tests were performed by the 232 Texas Transportation Institute.

Prior to these tests, over 41 states/provinces and eight countries have approved the free-standing J-J Hooks temporary barrier for use on their highways. This temporary barrier successfully passed NCHRP 350 TL3 tests in the 1990’s, qualifying it for approval as an alternate to existing state/provincial standard barrier designs. Easi-Set is identifying this barrier as J-J Hooks/NCHRP.

The anchored J-J Hooks design, dubbed J-J Hooks/MASH, incorporates an enlarged J-Hook, additional reinforcing to absorb the higher impact loads, and patented deflection limiting blocks.

Both designs connect seamlessly to each other and they can be placed in the same installation without the need for a transition section. This allows one installation to satisfy up to three different performance requirements. Both J-J Hooks designs are available in cross-sections commonly used on existing highways.

Related Content

  • Video analytics enhances urban rail safety
    December 16, 2016
    David Crawford explores some promising innovations for North American commuters. North America is experiencing a surge in commuter rail and metro development. The US now has 75 light rail and metro networks in operation; and California, in particular, is actively exploring ways of developing the state’s existing passenger rail operations into a fully integrated system.
    Read More
  • Bounce back with Berry’s spring steel buffer
    March 21, 2018
    Oops! Another small knock to your car in the car park. But thanks to the new spring steel buffer from Berry, it is the barrier that yields this time and not your vehicle’s bodywork. A key feature of the buffer is its deflection – typically around 300mm, according to Berry, part of the Hill & Smith group. This means that impact forces are absorbed by the buffers rather than transmitted directly to the mounting bolts or towards deformation of the railing system. They usually require one or two 20mm bolts.
    Read More
  • Gibraltar Cable Barrier Systems offers high safety at low cost
    March 25, 2014
    Gibraltar Cable Barrier Systems says that its new product offers high safety and cost efficiency for clients. Ease of installation makes the cable barrier system quick to set up and also helps lower costs. High vehicle containment and redirective capabilities are claimed and the system has been successfully tested to the NCHRP 350 TL-3 and TL-4 requirements for use in North America. Post spacings can be at distances of up to 9.14m (30feet) while the system can be used in applications with slopes of up to
    Read More
  • C/AVs could mean cheaper roads
    October 28, 2019
    The safety benefits of C/AVs have long been promoted – but research suggests they should also contribute to cheaper roads. David Crawford investigates the potential benefits in infrastructure costs Building narrower freeway lanes to accommodate the enhanced route-tracking capabilities of connected and autonomous vehicles (C/AVs), running in platoon conditions, could result in cost savings of £0.5 million (€0.56 million or US$6.5 million) for every km of road length built. Such benefits could be secur
    Read More

Highlighted Content