J-J Hooks barrier system passes demanding crash tests

Easi-Set Worldwide has announced that its J-J Hooks barrier system has successfully passed both bolted-down and pinned-down MASH Test Level 3 crash tests (MASH - Manual for Assessing Safety Hardware), out-performing other comparable systems. The tests were performed by the Texas Transportation Institute.
June 19, 2012 Read time: 1 min
5948 Easi-Set Worldwide has announced that its J-J Hooks barrier system has successfully passed both bolted-down and pinned-down MASH Test Level 3 crash tests (MASH - Manual for Assessing Safety Hardware), out-performing other comparable systems. The tests were performed by the 232 Texas Transportation Institute.

Prior to these tests, over 41 states/provinces and eight countries have approved the free-standing J-J Hooks temporary barrier for use on their highways. This temporary barrier successfully passed NCHRP 350 TL3 tests in the 1990’s, qualifying it for approval as an alternate to existing state/provincial standard barrier designs. Easi-Set is identifying this barrier as J-J Hooks/NCHRP.

The anchored J-J Hooks design, dubbed J-J Hooks/MASH, incorporates an enlarged J-Hook, additional reinforcing to absorb the higher impact loads, and patented deflection limiting blocks.

Both designs connect seamlessly to each other and they can be placed in the same installation without the need for a transition section. This allows one installation to satisfy up to three different performance requirements. Both J-J Hooks designs are available in cross-sections commonly used on existing highways.

Related Content

  • March 18, 2014
    Wider uses for weigh in motion data
    Colin Sowman talks to Terry Bergan of International Road Dynamics about the latest uses of weigh-in-motion systems. Raising allowable truck weight limits improve transport efficiency but leaves an ever-increasing number of bridges vulnerable to being overloaded and damaged by vehicles heavier, and in some cases far heavier, than they were designed to carry. The simplistic solution is to impose weight restrictions and erect appropriate signs - but this could have severe knock-on effect on trucking operations
    Read More
  • May 24, 2016
    High-speed WIM moves onto the main highway
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More
  • May 11, 2020
    AVs and poor weather – a bad mix
    The US DoT has produced a report on how adverse weather and road conditions will affect automated vehicles – it found inconsistency between different cars with these features which are already on highways and suggests limitations are not yet understood
    Read More
  • March 7, 2024
    The Rebloc H4b gantry is a milestone in safety
    Rebloc has unveiled the world's first H4b-tested highway integrated gantry system, a pioneering breakthrough in road safety that visitors to Intertraffic will get to see.
    Read More

Highlighted Content