Skip to main content

Latest pedestrian safety technology from McCain

Designed to boost driver awareness of pedestrians, McCain says its latest technology for pedestrian safety, the rectangular rapid flashing beacon (RRFB), is widely recognised as a means to reduce accidents between vehicles and pedestrians at intersections and mid-block crosswalks without traffic signals. An ideal solution for a range of applications, the RRFB has highly visible high-intensity LEDs which remain dark until activated by a pedestrian, when the lights flash in a wig-wag pattern, alerting appr
March 19, 2014 Read time: 2 mins
Designed to boost driver awareness of pedestrians, 772 McCain says its latest technology for pedestrian safety, the rectangular rapid flashing beacon (RRFB), is widely recognised as a means to reduce accidents between vehicles and pedestrians at intersections and mid-block crosswalks without traffic signals.

An ideal solution for a range of applications, the RRFB has highly visible high-intensity LEDs which remain dark until activated by a pedestrian, when the lights flash in a wig-wag pattern, alerting approaching vehicles that pedestrians are present.

According to McCain, RRFBs are rapidly gaining popularity as an inexpensive and effective alternative for improving compliance and facilitating pedestrian crossing manoeuvres; generally delivering driver compliance of around 80 per cent.

Following an extensive study confirming the effectiveness, the 831 Federal Highway Administration issued an interim approval of the RRFB in the Manual of Uniform Traffic Control Devices (MUTCD). According to the approval, the RRFB offers “significant potential safety and cost benefits, because it achieves very high rates of compliance at a very low relative cost in comparison to other more restrictive devices that provide comparable results, such as full midblock signalisation.”

Related Content

  • February 1, 2012
    Progressing work zone safety systems
    David Crawford investigates progress in a key safety area - work zones. Highway construction zone safety is taken seriously enough in the US to merit a special spring National Work Zone Awareness Week, which in 2010 ran from 19-23 April. Headed by the US Department of Transportation's Federal Highway Administration (FHWA), this aims to reduce an annual toll of work zone deaths - 720 in 2008 (an average of one every 10 hours) with more than 40,000 traffic injuries (an average of one every 13 minutes).
  • February 6, 2012
    Progressing work zone safety systems
    David Crawford investigates progress in a key safety area - work zones
  • February 28, 2014
    AGD retrofit LED pedestrian signals aid carbon savings
    AGD Systems’ 924 and 924R LED wait indicator solution provides UK local authorities with the means to upgrade pedestrian crossing wait indicator bulb units to the latest high intensity LED technology, as traditional filament light bulbs are gradually phased out, AGD can provide a cost effective retrofit LED kit or a complete. Delivering power savings of up to 80 per cent over existing lamp-based units, AGD’s 924 and 924R retrofit kits are easy to install and fully compatible with all main industry cont
  • February 3, 2012
    Developments in signal head lens technology
    Heads and tails Leading manufacturers of traffic signal systems discuss developments in signal head technology as well as some of the legacy issues which affect future deployments Transparent model of Dambach's ACTROS.line technology, showing the bus electronics in the signal head Cowls could be superseded by the greater use of lens technology