Skip to main content

Illuminated road studs aid roundabout safety

In a bid to improve safety at the Sheriffhall roundabout near Edinburgh, Scotland, Clearview Traffic has been working with BEAR Scotland on an innovative accident reduction project at the complex six-arm gyratory roundabout which is used by over 42,000 vehicles per day. The project, which Clearview says is the first of its kind in the UK, uses the company’s IRS2 intelligent hardwired road stud to increase driver awareness and improve lane discipline on and off the roundabout. Improvements and efficien
July 15, 2014 Read time: 2 mins
In a bid to improve safety at the Sheriffhall roundabout near Edinburgh, Scotland, 557 Clearview Traffic has been working with BEAR Scotland on an innovative accident reduction project at the complex six-arm gyratory roundabout which is used by over 42,000 vehicles per day.

The project, which Clearview says is the first of its kind in the UK, uses the company’s IRS2 intelligent hardwired road stud to increase driver awareness and improve lane discipline on and off the roundabout.

Improvements and efficiencies made to the traffic signal-controlled roundabout in recent years have dramatically increased its capacity. BEAR Scotland was keen to ensure safety measures were improved in line with the increased use of the roundabout. Investigations found that inadvertent lane drifting was a significant contributory factor to negotiating it safely.

To address this issue, whilst at the same time causing minimal impact on the existing road markings and supporting infrastructure of the roundabout, BEAR Scotland and Clearview Traffic devised a unique road stud layout scheme that would guide the A720 traffic from either direction safely around and off the roundabout.

With the new system in place, as soon as the traffic signal on the entrance to the roundabout turns green, studs embedded in the road surface immediately illuminate and guide drivers onto the appropriate lanes of the roundabout. As the traffic signal turns red, all the studs on that section switch off and the studs on the next section illuminate as the corresponding traffic signal turns green. In this way, drivers now get an illuminated green phase to guide them all the way around and off the roundabout, with clear visual definition of the lanes to heighten lane discipline and reduce preventable collisions.

For more information on companies in this article

Related Content

  • Traffex snapshot reveals enforcement advances
    July 24, 2017
    An indication of just how far beyond spot speed and red light the enforcement sector has progressed was evident in the range of new and improved equipment on display at the recent Traffex event in Birmingham. One of the key trends, particularly in the UK but also evident elsewhere, is the increase in average speed enforcement, according to RedSpeed’s managing director Robert Ryan, who predicts a big increase in installations this year. “The price point has reached a level authorities can afford,” he says, a
  • Trials show fuel savings with connected vehicle technology
    December 16, 2015
    American and European trials point to fuel and emissions reductions. A trial by University of California-Riverside (UC-Riverside) has shown connected vehicle technology has the potential to reduce fuel consumption (and therefore emissions) by up to 18% compared with an uninformed driver.
  • Jenoptik’s average speed cameras reduce speeding on A90
    January 24, 2018
    99 out of every 100 vehicles are now complying with the speed limit along a section of the A90 between Dundee and Stonehaven where Jenoptik’s Average Speed Cameras (ASC) have been installed, according to speed surveys carried out by Transport Scotland. The findings also showed that only 1 in every 5000 vehicles are now speeding at more than 10mph over the limit; a reduction of 1 out of every 5 vehicles that were driving over the limit before the ASC installation. Humza Yousaf, transport minister, said:
  • Rail safety technology launched in Central Minnesota
    January 7, 2013
    New safety technology being installed along some rail lines across the US, including Central Minnesota, aims to prevent deadly train crashes caused by human error. The technology is designed to automatically stop or slow a train to prevent accidents such as a collision with another train or a derailment caused by excessive speed. The changes stem from federal legislation passed in 2008 after a commuter train collided head-on with a freight train in California, killing twenty-five people and injuring 135. An