Skip to main content

Highways England's Eastern Regional Control Centre upgraded

Audio-visual systems integrator Electrosonic has recently installed a dynamic display system (DDS) at Highways England’s Eastern Regional Control Centre in South Mimms. Comprising of LED illuminated cubes, the new DDS technology provides a solution that is virtually maintenance free, energy efficient and suitable for 24/7 usage. Electrosonic installed an 8x3 array of Mitsubishi Electric 67PE78, 67-inch SXGA+ LED illuminated cubes, which are brighter, of higher resolution and use less power than their pre
June 1, 2016 Read time: 2 mins
Audio-visual systems integrator 6683 Electrosonic has recently installed a dynamic display system (DDS) at 8101 Highways England’s Eastern Regional Control Centre in South Mimms. Comprising of LED illuminated cubes, the new DDS technology provides a solution that is virtually maintenance free, energy efficient and suitable for 24/7 usage.

Electrosonic installed an 8x3 array of 7874 Mitsubishi Electric 67PE78, 67-inch SXGA+ LED illuminated cubes, which are brighter, of higher resolution and use less power than their predecessor. Additionally, they do not require any consumables such as projector lamps that would need regular replacement.

The cubes have a 4:3 aspect ratio that matches the camera images exactly, while their automatic colour balancing feature ensures that all cubes in the array give a uniform performance. They are energy efficient, low maintenance and can support 24/7 usage. The cubes also benefit from an extremely narrow 1-mm bezel, which presents a virtually seamless image when magnified across a 2x2 cube array.

The DDS can show any combination of video or images across the array, determined by any one of the 20 operator positions. The vast majority of images are derived from Highways England’s network of 870 cameras located around the regions roads. In addition, images from other regions, roadwork cameras, Transport for London and broadcast images can also be selected.

The display receives its inputs from an Eyevis Netpix NPX-4800 video wall processor, chosen for its flexibility and capability of dealing with many source types. It also met Highways England’s requirement that the processor should be able to process directly H264 compressed CCTV images delivered over IP, according to ONVIF (Open Network Video Interface Forum) format.

For more information on companies in this article

Related Content

  • ‘One-Watt’ traffic signals from Siemens
    April 6, 2016
    Small is big news on the Siemens stand as the company unveils its ultra-low consumption One-Watt technology for traffic lights. The move from incandescent bulbs to 230V LED lamp heads had seen an enormous reduction in power consumption (down from 60Watts per head to around 15W) but means the load resistors and switching elements in the signal units are often the biggest energy consumers.
  • WSDOT installs LED lights on Highway 101
    March 1, 2013
    Washington State Department of Transportation (WSDOT) has replaced the old high-pressure-sodium (HPS) lighting system along Highway 101 with the state’s first light-emitting-diode (LED) lighting system. “This is the first time we’ve used LED lights on a state highways and for most drivers, it will be quite a change,” said John Nisbet, WSDOT state traffic engineer. “LED lights appear whiter and brighter than our standard lights. And those who travel the area late at night will see some lights dimmed or shut
  • Theia Technologies works to cover the angles
    March 1, 2025
    Rectilinear lenses provide ultra-wide field of view without distortion
  • Indra brings in Citilog for Silvertown Tunnel incident detection
    June 27, 2024
    System will help reduce congestion in and around tunnel under River Thames in London