Skip to main content

Indra brings in Citilog for Silvertown Tunnel incident detection

System will help reduce congestion in and around tunnel under River Thames in London
By David Arminas June 27, 2024 Read time: 2 mins
1.4km-long twin-bore tunnel will have two lanes per tunnel (© Pavel Losevsky | Dreamstime.com)

Indra has chosen an automatic incident detection system from Citilog for the UK's new Silvertown Tunnel, under construction beneath the River Thames in London.

Citilog supplies video based automatic incident detection solutions for tunnels, bridges and highways. The company will integrate its automatic incident detection (AID) system to help reduce congestion in and around the tunnel between the London borough of Greenwich, the peninsula area, and West Silvertown on the northern bank of the Thames.

The 1.4km-long twin-bore tunnel have two lanes per tunnel with dedicated lanes for heavy goods vehicles and buses. There will be no pedestrian or cycle access but a shuttle bus has been considered for cyclists.

The AID system, that includes 59 CCTV cameras, will enhance safety and incident management with real-time incident detection and response and also will minimise false alarms while maintaining high detection accuracy.

Using thousands of video clips will help train an advanced network to reduce false positives, allowing operators to focus on genuine emergencies. The AID system can also be easily upgraded and extended.

“Our long-standing partnership with Indra has been instrumental in providing the AID system for the Silvertown Tunnel,” said Volkert Samplonius, Citilog’s vice president for the Iberoamerica region, Israel, South Africa, Australia and New Zealand. “Our excellent detection rate, low false alarm rate and rapid incident response align perfectly with our commitment to safety and efficiency.”

Last autumn, Riverlinx CJV, a joint venture to which Transport for London (TfL) and Riverlinx SPV contracted the design and construction works for the project, awarded Indra a contract to equip the tunnel with its In-Mova Traffic platform and intelligent transport systems including the communication systems, the radio communications network and the traffic signals. Riverlinx CJV consists of Ferrovial Construction, BAM Nuttall and SK ecoplant.

The company’s technology is already used in London's 12 road tunnels that are managed by TfL. It is also being implemented in the Hindhead Tunnel for England’s road agency National Highways. Hindhead Tunnel is part of the 6km dual-carriageway that replaced one of the last remaining stretches of single-carriageway on the A3 road which connects London with the southern port of Portsmouth.

Related Content

  • January 13, 2025
    London's new Silvertown Tunnel set to open
    TfL says average peak journey times expected to be 20 minutes quicker
  • September 10, 2024
    Bridge & tunnel management: seeing the bigger picture
    A variety of technologies are available to monitor the health of critical infrastructure – and to keep the drivers who use it safe by flagging incidents while reducing false alarms
  • January 23, 2012
    UK's Hindhead tunnel pushes the boundaries of traffic management
    The new Hindhead Tunnel is the first in the UK to use radar-based incident detection. Paul Arnold, project manager with the Highways Agency, talks about the project. The comparatively remote location of the A3 Hindhead Tunnel has resulted in it becoming one of the most sophisticated in the UK in terms of monitoring and control systems, according to Paul Arnold, project manager for the Highways Agency (HA), which manages strategic roads in England and Wales. It is the first tunnel in the UK to use radar for
  • March 30, 2022
    Citilog has perfect congestion remedy
    Traffic incidents are the biggest contributor to nonrecurring congestion. Combined with natural bottlenecks at tunnels, bridges and highways, incidents ranging from debris on the road to vehicle accidents are every driver’s worst nightmare.