City of Liverpool relies on thermal imaging to boost cycling

In an effort to promote a healthy lifestyle and encourage cycling, the city of Liverpool in the UK has installed Flir’s thermal imaging technology to give cyclists a head start at two busy intersections and make cycling safer. The City is keen to make cycling easier and more convenient in the city and plans to invest in the creation of a network of safe cycle routes, improvements in safety training and enforcement, and ensuring that cycling is included in council policies.
April 22, 2016 Read time: 2 mins

In an effort to promote a healthy lifestyle and encourage cycling, the city of Liverpool in the UK has installed 6778 Flir’s thermal imaging technology to give cyclists a head start at two busy intersections and make cycling safer.

The City is keen to make cycling easier and more convenient in the city and plans to invest in the creation of a network of safe cycle routes, improvements in safety training and enforcement, and ensuring that cycling is included in council policies.

The city developed a dedicated cycle scheme for Leeds Street, which links directly with The Strand, where the historic Waterfront and Three Graces are located. The scheme is funded by the Regional Growth Fund via the UK Department for Business, Innovation and Skills and includes road resurfacing, innovative traffic signals, LED street lighting, public realm regeneration, cycle and pedestrian facilities and capacity improvements.

On completion, the scheme should improve transport links by removing pinch points at junctions. It will also increase the capacity of the Leeds Street route, which links North Liverpool with the city’s commercial district.

Traffic signals at the two junctions display a green bike before the full green for other traffic, allowing cyclists a five second head start on other vehicles. The signal expires when the full green light comes on. The signals are powered by Flir ThermiCam sensors, which detect cyclists and distinguish them from other vehicles, meaning the advance lights are not used when there are no cyclists, avoiding delays to other road users.

ThermiCam uses the thermal energy emitted from vehicles and cyclists and is able sensor to detect vehicles and cycles in both daylight and darkness, over a long range and in difficult weather conditions. In Liverpool, the sensor transmits its cycle detection information to the traffic light controller to provide a more dynamic control of traffic lights, resulting in reduced vehicle idling time, improved traffic flow and improved safety and mobility for cyclists.

“The two junctions on Leeds Street were designed to make cyclists more confident in our city traffic and at the same time, increase awareness with motorists about the presence of cyclists,” says James Leeming, senior project manager at Liverpool City Council.

Urban Traffic Control

Related Content

  • May 29, 2018
    Five companies shortlisted for Roads of the Future project
    Five companies will present ideas ranging from smart traffic lights to segregated driverless zones in a competition to make UK roads fit or driverless cars. The candidates will receive £30,000 to test ideas, with £50,000 prize available to the winner this autumn. The National Infrastructure Commission shortlisted the companies from 81 entries submitted to The Roads for the Future initiative – led by Highways England and Innovate UK. Aecom is examining how smart signals could advise drivers and vehicles
    Read More
  • December 22, 2015
    Jeddah juggles transport needs of residents, pilgrims and tourists
    Mass pilgrimages, new tourists and a growing population lead Jeddah to seek some smart transport solutions as David Crawford finds out. Rationalising traffic movement and public transport in a major Middle Eastern business and tourist centre that is also a gateway for millions of religious pilgrims every year is the challenge for the 20-year Jeddah Strategic Plan and the Jeddah Public Transport Programme (JPTP) it spawned. The latter is costed at US$8bn.
    Read More
  • January 27, 2014
    UK’s first low level cycle signals installed
    The first low level traffic signals specifically designed for cyclists in the UK have been installed in London, following extensive safety trials by Transport for London (TfL) on behalf of the Mayor. Low level cycle signals have been common place in certain parts of Europe for many years, but have never been approved for use in the UK. During off-street trials, which were carried out in partnership with the Department for Transport (DfT) last year, more than 80 per cent of cyclists favoured the use of lo
    Read More
  • May 8, 2015
    Data holds the key to combating VRU casualties
    Accident analysis software can help authorities identify common causes and make best use of their budgets, as Will Baron explains. More than 1.2 million people die on the world’s roads each year and according to the World Health Organisation, half of these are pedestrians and vulnerable road users (those whose vehicle does not have a protective shell, such as motorcyclists and cyclists). While much has been done to improve road safety and cut the number of deaths and serious injuries on our roads, a great d
    Read More

Highlighted Content