Skip to main content

LowCVP calls on truck operators and others to focus on cutting truck emissions

To coincide with its participation in the new Freight in the City event on 27 October, the LowCVP is calling on fleet operators, local authorities and others to join forces in building the market for heavy goods vehicles which cut carbon, reduce emissions and lower fuel costs. In earlier research, the LowCVP has identified three main opportunities for cutting emissions from HGVs which pointed to the need for specific interventions: independent testing to validate the effectiveness of retrofit technology
October 22, 2015 Read time: 3 mins
To coincide with its participation in the new Freight in the City event on 27 October, the LowCVP is calling on fleet operators, local authorities and others to join forces in building the market for heavy goods vehicles which cut carbon, reduce emissions and lower fuel costs.

In earlier research, the LowCVP has identified three main opportunities for cutting emissions from HGVs which pointed to the need for specific interventions: independent testing to validate the effectiveness of retrofit technology; conversion to the use of natural gas/biomethane; and supporting the uptake of hybrid and pure electric vehicles, particularly for use in urban environments.

The Partnership will be holding a stakeholder workshop in late November to progress the LowCVP’s commercial vehicle activity, including the accreditation scheme for after-market technologies as well as providing opportunities for operators and others to collaborate in a new, DfT-funded test programme to benchmark vehicles powered by natural gas/biomethane. The group will also commence activity on the specific actions needed to stimulate low carbon urban freight solutions

The workshop will also provide the opportunity to connect with and influence the future work programme of the LowCVP’s Commercial Vehicle Working Group, which will drive forward these and other initiatives in the freight decarbonisation area.

One of the key opportunities identified in earlier LowCVP work for cutting carbon from HGVs in the UK was to increase the uptake of existing retrofit technology by operators in the market. Independent verification of the performance of technologies and a credible assessment of the applicability of equipment to different operational environments were identified as key requirements.

A test process has already been developed and is ready for peer review and launch. The next phase will be to develop an umbrella accreditation process for approving/certifying low carbon technologies for HGV applications. The scheme will also assess the operational characteristics of the technologies, and their applicability, for potential operators.

The scheme will provide test results and recommendations to DfT/OLEV for stimulating uptake. Its test protocol has many potential future applications in the evaluation of cleaner truck technologies.

With the Low Carbon Truck Trial (LCTT) nearing its final phase, and the emergence of Euro VI gas vehicle technology for HGVs, the LowCVP is also managing a new test programme for the 1837 Department for Transport to benchmark the latest gas trucks for emissions including methane, carbon dioxide (CO2) and NOx, and fuel consumption.

The project will compare the performance and emissions of gas vehicles (both OEM and retrofit conversions) with their direct diesel counterparts in a consistent manner using the latest PEMS equipment run over repeatable, realistic and representative track cycles. The outputs from the project will provide the comprehensive evidence-base needed on gas use in HGVs for the formation of long-term government policy options in this sector.

Andy Eastlake, LowCVP's MD said "In terms of road transport, most of the focus in recent years has been on cutting emissions from cars and buses. Road freight in vans and trucks is responsible for around 35 per cent of the UK’s total road CO2 emissions and there are plenty of opportunities for the sector to make a real contribution to the UK’s climate targets – as well as helping to cut operators’ costs and contribute to improvements in air quality.”

For more information on companies in this article

Related Content

  • Joined-up thinking for future ITS
    May 8, 2015
    David Crawford looks at a US model which, for modest federal funding, is producing substantive results. Outward and upward is the clear message emerging from the US$458,000, 2015 workplan of the US government’s ENTERPRISE (Evaluating New TEchnologies for Roads PRogram Initiatives in Safety and Efficiency) joint funding scheme for ITS research.
  • VisionTrack VRU systems set for New York school buses
    March 14, 2025
    Vulnerable road user technology uses AI-powered cameras
  • Blockchain: the next big thing for ITS? Really?
    October 8, 2018
    Everyone’s heard of blockchain – but most people are less sure about what it really is, and how it might be used in transportation. Andrew Williams peers into cyberspace to find some answers. A growing number of organisations in the ITS industry are exploring how blockchain technology could be used for ITS and mobility applications. So, what exactly is blockchain technology? What are the key current and potential applications in the mobility and ITS sector? And what practical benefits might it bring?
  • Feasibility study to look at use of dynamic wireless power transfer on UK roads
    March 13, 2015
    The UK’s Transport Research Laboratory (TRL) has been commissioned by the Highways Agency to undertake a feasibility study into whether dynamic wireless power transfer (WPT) technology can be used on England’s motorways and major A roads, the Strategic Road Network, to prepare for and potentially encourage, greater EV take-up. This study is the first part in a much larger programme of research and trialling for dynamic WPT technology to be undertaken in the UK. TRL was selected to deliver the feasibility st