Skip to main content

Highways Agency approval for Clearview Traffic

Clearview Traffic Group has gained formal Highways Agency Type Approval for its M100 sensors and M150 interface card to be used as a viable alternative to inductive loops for Motorway Incident Detection and Automatic Signalling (MIDAS) applications, having met the rigorous performance and assessment requirements of the Highways Agency MCH1529 standard.
June 3, 2014 Read time: 2 mins
557 Clearview Traffic Group has gained formal 503 Highways Agency Type Approval for its M100 sensors and M150 interface card to be used as a viable alternative to inductive loops for Motorway Incident Detection and Automatic Signalling (MIDAS) applications, having met the rigorous performance and assessment requirements of the Highways Agency MCH1529 standard.

The wireless vehicle detection system uses embedded in-road magnetometer M100 sensors to detect the presence and lane occupancy of vehicles, providing a more reliable, lower cost and easy to install alternative to traditional inductive loops. For MIDAS applications the M100 sensors, two per lane at standard 4.5m spacing, are used in conjunction with the M150 interface card that is specifically designed to be compatible with every type of MIDAS outstation in use on the network today.

Nick Lanigan, managing director of Clearview Traffic, says “This seal of approval from the Highways Agency is a great boost for the company and acknowledges the hard work we have done to deliver a new solution to market that paves the way for much lower cost MIDAS deployments.”

For more information on companies in this article

Related Content

  • Opening the closed-loop to realise ITS benefits
    April 8, 2014
    Jim Leslie, manager of ITS applications engineering at the Econolite Group looks at practical steps in transitioning from closed-loop masters to a centralised ATMS. Not many years ago the standard method of coordinating signalised intersections in local areas was to install an on-street master – each of which monitored and controlled a limited number of signal controllers or intersections as a closed-loop system. And, to a certain extent, each closed-loop system was autonomous from others deployed by the ag
  • German authorities use CB-radio message to reduce accidents in roadworks
    April 8, 2014
    Citizen Band radio is proving useful to prevent accidents in Germany’s roadworks. In common with other German Länder (federal regions) with large volumes of commercial vehicles using their trunk road networks, Bavaria had been experiencing high levels of road traffic accidents (RTAs) involving heavy trucks in the vicinity of minor motorway maintenance sites. This was despite the extensive visual warning regulations published in the German federal road safety audit (RSA) guidelines for the protection of site
  • A carbon free and accident free Europe by 2015?
    February 2, 2012
    By 2050, the Europe Commission aims to make transport in Europe carbon- and accident-free. Between now and then, however, a significant technological development and deployment effort is needed. Here, Neelie Kroes, European Commission Vice-President for the Digital Agenda, talks about what's being done. In many respects, COOPERS, CVIS and SAFESPOT, set up by the European Commission (EC) to explore the potential of cooperative infrastructure systems, are already legacy projects. Between them, the three devel
  • Surface mount antennas support all global LTE frequencies
    October 18, 2013
    According to manufacturer Mobile Mark, its new range of multiband MIMO (multiple-input-multiple-output) antennas for wireless fleet management systems support all LTE frequencies worldwide, including 700 MHz, 1800 MHz, 1900 MHz and 2600 MHz. The LTM series was designed for wireless applications that combine an LTE MIMO modem with a wi-fi MIMO modem and a GPS receiver, a combination that requires five separate antenna elements. The LTM combines up to five high-efficiency antennas in one compact, surface-mo