Skip to main content

Kapsch wooden gantry installed on Austrian highway

Renewable timber construction means Asfinag installation 'saves 15 tonnes of CO2'
By Adam Hill July 18, 2024 Read time: 2 mins
The Green Gantry is made from spruce and larch (© Kapsch TrafficCom)

Austrian roadway operator Asfinag has installed a Kapsch TrafficCom Green Gantry.

The largely prefabricated toll gantry is made from renewable timber rather than steel or aluminium, "which are associated with significant emissions due to their manufacturing and recycling processes", Kapsch says.

The company suggests that the Green Gantry on a highway in Carinthia, Austria, saves 15 tonnes of CO2, while comparable steel gantries create up to 30 tonnes of CO2 during production.

“Our Green Gantry not only has a positive CO2 balance, it has the same load-bearing capacity and an even better environmental impact as a traditional gantry," says Michael Weber, head of sales EMENA at Kapsch TrafficCom.

"In addition, it meets all relevant European norms and standards for gantries, so it is equally safe to deploy and to maintain, and after its lifetime of at least 20 years, it can be dismantled and re-used without causing additional pollution.”

"For us, sustainable construction is not just an empty slogan; we want to set new standards in this area," say Asfinag board members Hartwig Hufnagl and Herbert Kasser in a statement. "Innovations are the driving force behind this. Wood as a building material can also play an important role on the motorway in the future."

The gantry's load-bearing core is made of glued and laminated spruce timber, with weather-resistant larch wood used for the outer layer.

Installation of the gantry took "only about one day" and was managed by Asfinag and traffic technology specialist Forster.

Electricity for operating the gantry equipment comes from its own photovoltaic system, with battery storage also installed to ensure it works at night and in bad weather.

For more information on companies in this article

Related Content

  • Kapsch TrafficCom increases transponder production
    January 26, 2012
    Road toll system provider Kapsch TrafficCom is to raise production capacity at its factory in the Swedish town of Jönköping as a result of two orders which have a combined value of US$29.37million.
  • Kapsch presents mobility solutions for smart cities at TRA Vienna
    April 13, 2018
    Three Kapsch subsidiaries will showcase smart mobility solutions for road and rail at the Transport Research Arena (TRA), in Vienna, from 16-19 April. The company will discuss how the Austrian technology group contributes to modern traffic management. These subsidiaries include Kapsch TrafficCom, Kapsch CarrierCom and Kapsch PublicTransportCom. Georg Kapsch, chief executive officer of the Kapsch, will discuss the impact of digitalisation on transportation and mobility. He will also provide a session on
  • Saferoads displays Omni Stop Bollard
    March 24, 2014
    Australian firm Saferoads is offering an improved roadside protection product in the shape of its new Omni Stop Bollard. The product is suited to installations such as around construction workzones or pedestrian and commercial areas, where there may be site personnel or people congregating alongside a busy roadway. The Omni Stop Bollards can be spaced so as to allow free access for pedestrians or cyclists, while providing protection from errant vehicles.
  • US infrastructure: once in a lifetime
    April 23, 2021
    Expectations are sky-high for Amtrak Joe and Mayor Pete as they use infrastructure spending to rebuild the US economy post-Covid – and ITS firms should be able to get a share...