Volvo develops self-driving autonomous refuse vehicle

Volvo has developed a bespoke autonomous refuse collecting vehicle designed to minimise the need for the driver to climb in and out of the cab when collecting the bins for emptying into the body. Having driven the route to program the stopping points, on subsequent visits the driver can simply press a button on the side of the vehicle to initiate the vehicle moving to the next position – either forward or backwards. The appropriate gear is engaged and the park brake released automatically until the move is
May 17, 2017 Read time: 2 mins
609 Volvo has developed a bespoke autonomous refuse collecting vehicle designed to minimise the need for the driver to climb in and out of the cab when collecting the bins for emptying into the body.

Having driven the route to program the stopping points, on subsequent visits the driver can simply press a button on the side of the vehicle to initiate the vehicle moving to the next position – either forward or backwards. The appropriate gear is engaged and the park brake released automatically until the move is completed and then the process is reversed, leaving the driver outside the cab and able to ensure there is nothing in the vehicle’s path.

If the sensors detect something in the way, the vehicle will stop until the driver either moves the obstacle, prompts the vehicle to drive around the item and return to its original path, or takes manual control. A strip of blue LED indicates the vehicle is in autonomous mode and a green light indicates when the park brake is engaged.

During a demonstration, the vehicle travelled in the reverse direction as it was fitted with a rear loading body and this allowed the driver to remain towards the rear of the vehicle instead of having to go to the front during each move to check the path is clear. 
Location Based Systems

For more information on companies in this article

Related Content

  • Jenoptik supplies sophisticated multi-section control project
    November 17, 2014
    Efficient speed enforcement in the most highly frequented tunnel in Austria on the A7 near Linz. The Bindermichl-Niedernhart tunnel complex on Austrian highway A7 connects the major east/west A1 route from Vienna/ Bratislava to Munich/Salzburg with the A7/ E55 running south from Prague in the Czech Republic. This happens right in the middle of the city of Linz, Austria.
    Read More
  • RAC survey shows big safety gains with average speed enforcement
    January 11, 2017
    Cheaper and easier communications are providing authorities with new options for influencing driver behaviour. Colin Sowman reports. It’s official; Average speed cameras (ASCs) cut the number of fatal or serious injury crashes by more than a third.
    Read More
  • High-speed WIM moves onto the main highway
    May 24, 2016
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More
  • Preventing connected vehicles creating disconnected drivers
    November 12, 2015
    Advanced driver assistance systems (ADAS) are evolving at a rapid pace – but drivers’ ability to cope with them is not and at some point the mismatch must be addressed. Probably the biggest challenge the transportation industry has ever faced.” That is how Dr Bryan Reimer of Massachusetts Institute of Technology AgeLab describes the challenges posed by semi-autonomous vehicles.
    Read More

Highlighted Content