Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • Japan to equip 5G base stations on traffic lights
    June 24, 2019
    The Government of Japan is to install 5G wireless communications base stations on traffic signals nationwide by 2025. A report by The Japan News says the project is expected to reduce costs for telecommunications service providers. As part of the project, traffic signals will be equipped with devices to measure the amount of traffic. The information sent from the stations to the vehicles is expected to support autonomous driving. Japan is not the only company looking to harness the potential of 5G. In F
  • DTV implements long-term cycle monitoring
    February 28, 2014
    B-Riders (www.b-riders.nl) is the first project ever to closely follow a large group of bike users (2,500 participants) over a long period of time – one year. A highly innovative bike tracking system was developed, and implemented, featuring an app that automatically registers all trips 24/7. The system then autonomously analyses trips and assigns them into categories - foot, car, public transport or bike.
  • Case Systems call boxes and parking system
    April 15, 2013
    Case Systems, which develops and maintains innovative reliable wireless technologies for the transportation and parking industries, will use the ITS America Annual Meeting to highlight its roadside call box technology and parking systems.
  • USDOT sponsors new connected vehicle webinars
    January 25, 2016
    The US Department of Transportation (USDOT) is sponsoring three webinars to assist the Connected Vehicle Pilot sites, early installers and other interested stakeholders, as part of the Connected Vehicle Pilot Deployment Program Technical Assistance Webinar series, which began last month. The Connected Vehicle Pilot Deployment Program seeks to combine connected vehicle and mobile device technologies in innovative and cost-effective ways. Ultimately, this program will improve traveller mobility and syste