Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • New Jersey DOT unveils travel time information signs
    January 21, 2013
    Capitalising on its investment in Intelligent Transportation Systems (ITS) technology, New Jersey Department of Transportation (NJDOT) is to install permanent dynamic message signs (DMS) along New Jersey’s interstate highways. The signs display major waypoints, such as intersecting highways or significant roadway features, and indicate how many minutes it will take to reach that waypoint. The DOT has completed the testing phase on fifteen DMS on I-287 and I-195 and is planning further signs on other major
  • C40 mayors make global ‘clean air’ pledge
    October 11, 2019
    In a move that will have significant implications for urban transit, 35 mayors at this week’s C40 World Mayors Summit in Copenhagen have pledged to “implement substantive clean air policies by 2025”. Among other developments, this is likely to mean further increases in low- or zero-carbon public transport and zero-emissions zones, along with enhanced incentives and infrastructure to support walking and cycling, in cities worldwide. Signing the C40 Clean Air Cities Declaration, the mayors signalled their
  • 3M showcases passive RFID and ANPR technology
    March 26, 2014
    3M has two stands here at Intertraffic this year – one which focuses on its traditional product offerings and a second that highlights its end-to-end ITS offer, says the company’s Julie Cooper. “We’re showcasing both passive RFID and automatic licence plate recognition technology for a variety of applications, including traffic management, e-tolling, and parking and access control. “Our core message is that we’re not just a hardware supplier but a provider of complementary solutions which can address al
  • Schneider Electric launches EcoTrafiX management solution
    September 10, 2014
    Energy management specialist Schneider Electric has launched traffic management solution EcoTrafiX for cities and highways operators. EcoTrafiX is a suite of equipment, software and services that is designed to allow customers to predict and respond to road problems. Its component parts include Command TM, which commands real-time city and highway signals and devices; Expert TM, which encompasses several modules to optimise traffic; and Mobility TM, which enables collaboration on events between mu