Vigilans looks to sensors and big data to replace bollards

You might think that a static metal or concrete bollard would be a cheap way of marking off a restricted area or car park. But it can cost up to €30,000 to install a bollard. And costs continue to be incurred, as bollards will typically be damaged by vehicles five or six times in a year. In fact, it is five times cheaper to install a camera and link it to licence plate-reading software and a ‘white list’ of vehicles that are allowed to enter the restricted area, says Erik Dijkshoorn, director of Vigilans, w
April 6, 2016 Read time: 2 mins
You might think that a static metal or concrete bollard would be a cheap way of marking off a restricted area or car park.


But it can cost up to €30,000 to install a bollard. And costs continue to be incurred, as bollards will typically be damaged by vehicles five or six times in a year.

In fact, it is five times cheaper to install a camera and link it to licence plate-reading software and a ‘white list’ of vehicles that are allowed to enter the restricted area, says Erik Dijkshoorn, director of Vigilans, which handles the training of municipal authorities or companies that buy the camera system.

Vigilans is owned by 2114 ARS Traffic & Transport Technology, which sells or leases these camera systems and creates the relevant software. There are around 7000 bollards in the Netherlands and ARS believes that 80-90% of them will be replaced with cameras in the next four years.

“It’s all about big data now, and sensors,” says Dijkshoorn. “A camera system is a type of sensor and, in future, governments will buy data.” Vigilans and ARS are in talks with several countries over purchasing their system.

Related Content

  • March 1, 2013
    Airborne traffic monitoring - the future?
    A new frontier in the quest to monitor road traffic is opening up… but using airborne drones to reduce the jams comes with some thorny issues. Chris Tindall reports. Imagine if you could rely on a system that provided all the data you needed to regulate traffic flow, route vehicles and respond swiftly to emergencies for a fraction of the cost of piloting a helicopter. That system exists, but as engineers and traffic managers start to explore the potential of unmanned aerial vehicles (UAVs) – more commonly k
    Read More
  • February 2, 2012
    Bluetooth speed and travel data collection shows cost savings
    Houston TranStar is using Bluetooth sensors to collect speed and travel data in a project which is already demonstrating significant cost savings
    Read More
  • May 24, 2016
    High-speed WIM moves onto the main highway
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More
  • April 7, 2014
    America fires V2V starting gun
    Leo McCloskey, ITS America’s senior vice president for Technical Programs, talks to Jason Barnes about what the recent NHTSA ruling on light vehicle connectivity means for cooperative infrastructures in North America. In early February the US Department of Transportation’s (USDOT’s) National Highway Traffic Safety Administration (NHTSA) announced it had decided to start taking steps to enable Vehicle-to-Vehicle (V2V) communication technology for light vehicles. In so doing, the many safety-related applicati
    Read More

Highlighted Content