Skip to main content

Traffic-Lines’ Twister hydro-blasts road markings

The Twister, from German manufacturer Traffic-lines, represents an alternative method for removing road markings. Traffic Lines says that its environmentally friendly method uses nothing but water.
April 6, 2016 Read time: 2 mins
Lisa Raabe of Traffic-lines
The Twister, from German manufacturer 8324 Traffic-lines, represents an alternative method for removing road markings. Traffic-lines says that its environmentally friendly method uses nothing but water.


The system attacks the relevant area with a high-pressure water jet and then immediately sucks the used water back up together with the removed material. It uses a highly efficient suction action which means that there is no water residue left on the cleaned-up road surface.    

Traffic-lines says the machine is unique in the market because there is no accumulation of water inside the suction hood. This enables a very noticeable increase in performance compared to conventional hydro-blasting with the same pump performance.

The Twister also has another advantage: after removing the markings, the machine leaves the road surface dry while producing significantly less siltation. The result is better adhesion of newly applied markings, which increases durability for the markings.

Traffic-lines also makes ex 1.0, a patented, liquid marking removal additive that is biologically degradable.

Traffic-lines ex 1.0 helps loosen markings from surfaces without attacking those surfaces so that the old markings can then be removed by hydro-blasting. The process leaves as little residue as possible while minimising surface damage. Removing markings with the aid of traffic-lines ex 1.0 involves hardly any elution of bitumen and the aggregate is not exposed.

Related Content

  • January 26, 2012
    GIS-based state of the art emergency response, damage recovery
    The gecko is one of several members of the lizard family which demonstrate autotomy: the ability to re-grow a tail or some other appendage lost during a time of peril. The GITA's GECCo programme is looking to give US infrastructures much the same capability
  • October 27, 2016
    The downside of driverless vehicles
    Driverless cars will have a detrimental effect on congestion and security while the road safety benefits can be achieved sooner and cheaper using ADAS, argues Colin Sowman. Many Governments are consulting about the introduction of driverless vehicles and even running trials. As 70% or 80% of crashes are caused by human error, the promise of a crash-free future of driverless, self-driving or autonomous vehicles (call them what you will) is alluring, as are the claims of reduced congestion and lower emissions
  • March 20, 2018
    Smets Technology presents road surface retexturing truck
    Smets Technology is exhibiting its road surface retexturing truck ARC 3500 at Intertraffic. The compact surface treatment system can be deployed for roughening of road surfaces and for rubber removal at a working width of 2,400 mm. The vehicle is said to come with an average performance of 6,00m 2/h and its ultra-high-pressure pump aims to generate working pressures up to 2500/3000 bar as well as water volumes up to 72 I/min. In addition, it features three 800mm cleaning devices at the rear and one on each
  • May 30, 2013
    Communication: the future of machine vision
    Jason Barnes asks leading machine vision industry figures what they consider to be the educational barriers to the technology’s increased uptake by the ITS sector. The recent rush by some organisations within the ITS sector to associate themselves with the term ‘machine vision’ underlines just how important the technology has become in a relatively short space of time. However, despite the technology having been applied in certain traffic management applications for some years, there remains a significant s