Skip to main content

Traffic-Lines’ Twister hydro-blasts road markings

The Twister, from German manufacturer Traffic-lines, represents an alternative method for removing road markings. Traffic Lines says that its environmentally friendly method uses nothing but water.
April 6, 2016 Read time: 2 mins
Lisa Raabe of Traffic-lines
The Twister, from German manufacturer 8324 Traffic-lines, represents an alternative method for removing road markings. Traffic-lines says that its environmentally friendly method uses nothing but water.


The system attacks the relevant area with a high-pressure water jet and then immediately sucks the used water back up together with the removed material. It uses a highly efficient suction action which means that there is no water residue left on the cleaned-up road surface.    

Traffic-lines says the machine is unique in the market because there is no accumulation of water inside the suction hood. This enables a very noticeable increase in performance compared to conventional hydro-blasting with the same pump performance.

The Twister also has another advantage: after removing the markings, the machine leaves the road surface dry while producing significantly less siltation. The result is better adhesion of newly applied markings, which increases durability for the markings.

Traffic-lines also makes ex 1.0, a patented, liquid marking removal additive that is biologically degradable.

Traffic-lines ex 1.0 helps loosen markings from surfaces without attacking those surfaces so that the old markings can then be removed by hydro-blasting. The process leaves as little residue as possible while minimising surface damage. Removing markings with the aid of traffic-lines ex 1.0 involves hardly any elution of bitumen and the aggregate is not exposed.

Related Content

  • February 8, 2016
    Intertraffic debut for water-based road marking removal system
    For German company Traffic Lines, Intertraffic Amsterdam will be the first international exhibition it has participated at. The company was founded to focus on developing road marking removal technology against a background where many conventional techniques often do not produce the desired results and cause substantial damage to the road surface.
  • March 20, 2018
    Traffic-Lines promotes Duo-Twister suction system
    Creating and removing lines are a speciality of the German-based Traffic-Lines. The company’s Marking Machine 1.0, on display, is used for applying thermoplastics in open systems and allows the application of drop-on material. But for removal of lines, the company has just introduced the Duo-Twister, an eco-friendly way to remove rubber abrasion from heavily trafficked areas, especially runways and racetracks. Its patented high-pressure water blasting system operating at nearly 3,500bar is non-destructive
  • March 15, 2016
    Rethink required to reduce road transport’s environmental impact
    Against a background of a renewed focus on limiting the rise in average temperatures, Colin Sowman looks at a project that is taking a holistic approach to the environmental impact and safety of road transport. At the COP21 meeting in Paris last December, almost 200 nations agreed to reduce greenhouse gas emissions in an effort to keep the rise in global temperatures to 2°C) compared with pre-industrial levels. The transportation sector is a major contributor to the production of CO2, one of the main green
  • February 16, 2018
    ViaTherm Viking extends marking season
    Geveko Markings has addressed the situation in which road authorities or other road marking clients are asking for roads to be marked when the roads are too moist or wet. With the company’s ViaTherm Viking, the application window for bulk thermoplastic is increased and the application season is prolonged. ViaTherm Viking is a thermoplastic road marking material specially developed for application during early spring and late autumn, when there tends to be moisture on the roads. It has special adhesion