TinyMobileRobots launches tablet solution for road marker

Danish firm TinyMobileRobots is showing off a new tablet solution for its robot road marker at Intertraffic. The TinyPreMarker automatically lays out road lines – on motorways, airports or harbours - to an accuracy of 2cm, using a built-in GNSS receiver, the company says. Customers load the pre-marking course required on a programme such as AutoCAD. The product is compatible with CSV, DXF, GEO and LandXML data formats, which can then be transferred to the robot via USB, and the robot will then mark points
March 21, 2018 Read time: 2 mins
Size matters: Tiny Mobile Robots’ Lars Jøgensen

Danish firm 8701 TinyMobileRobots is showing off a new tablet solution for its robot road marker at Intertraffic. The TinyPreMarker automatically lays out road lines – on motorways, airports or harbours - to an accuracy of 2cm, using a built-in GNSS receiver, the company says.

Customers load the pre-marking course required on a programme such as AutoCAD. The product is compatible with CSV, DXF, GEO and LandXML data formats, which can then be transferred to the robot via USB, and the robot will then mark points or lines using an on-board aerosol spray.

The TinyPreMarker needs to be followed by a human, who can check visually that it is keeping to the right course and replace its aerosol if need be. The original product, launched in 2014, required a controller device with the robot – but the new solution means that customers need only an iPad or other tablet to do everything.

“It is totally autonomous and ten times faster than doing it manually,” says the company’s Lars Jorgensen. “We have sales all over the world: the US, Australia, Netherlands and Denmark, of course.”

Replaceable battery life is eight hours – and TinyMobileRobots says that it does not know of any customers which have had to use a back-up battery before that time. “We haven’t experienced that yet,” says development engineer Palle Flydtkjaer. Customers include surveying companies and others which have a need for high-volume road pre-marking work.

Stand: 6.106

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.tinymobilerobots.com TMR website link false http://www.tinymobilerobots.com/en/ false false%>

For more information on companies in this article

Related Content

  • NMi’s efficient calibration for enforcement technology
    March 24, 2014
    Netherlands based NMi has developed an array of accurate measuring systems for a range of traffic-related applications. Typical duties for these calibration systems include determining the accuracy of truck tachographs, parking meters that charge by the minute, speed measuring equipment or charging points for electric vehicles. The company claims expertise in meeting the legislative requirements in a wide array of countries, with worldwide acceptance of test reports or certification provided by NMi for use
    Read More
  • Lyft Green Mode option allows riders to request electric and hybrid vehicles
    February 14, 2019
    Lyft is launching a Green Mode feature within its app to provide riders in Seattle with the option to travel in an electric or hybrid vehicle. The move follows the company’s planned introduction of thousands of electric vehicles (EVs) onto its platform this year. Lyft says the deployment will allow its drivers to increase net earnings as it says the cost of travelling in an EV is half that of a petrol-powered car, therefore saving hundreds of dollars per month on fuel costs. Drivers can switch
    Read More
  • Intercomp celebrates milestones at Intertraffic 2018
    March 20, 2018
    Multiple milestones for Intercomp and its products will be celebrated at Intertraffic. The company’s in-ground strain gauge strip sensors, used in low and high-speed WIM (HSWIM), and its LSWIM axle scale have each successfully passed OIML initial verification testing, with the OIML R134 certificates in process. These successful tests coincide with the 40 year anniversary of the establishment of the Intercomp. Intercomp’s strain gauge strip sensors are grouted into 3 inch (75mm) channels cut into the ro
    Read More
  • Intercomp celebrates milestones at Intertraffic 2018
    March 20, 2018
    Multiple milestones for Intercomp and its products will be celebrated at Intertraffic. The company’s in-ground strain gauge strip sensors, used in low and high-speed WIM (HSWIM), and its LSWIM axle scale have each successfully passed OIML initial verification testing, with the OIML R134 certificates in process. These successful tests coincide with the 40 year anniversary of the establishment of the Intercomp. Intercomp’s strain gauge strip sensors are grouted into 3 inch (75mm) channels cut into the ro
    Read More

Highlighted Content