Skip to main content

TDS exhibits OIML-R134 certified low- and high-speed WIM system

Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi
March 20, 2018 Read time: 2 mins
Weight expectations: Traffic data systems’ Florian Weiss
4592 Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland.


“We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certification is hard and not every manufacturer of WIM will achieve it. We’ve gone the hard way.”

Legal requirements allow for just one out of 1,000 measurements to be wrong, Weiss says. “There is a huge market in terms of weight-based tolling and enforcement,” he goes on, adding that accurate weighing is useful to the authorities and to operators themselves, in a number of important ways.

“Overloaded vehicles aren’t covered by insurance – a lot of owners and operators don’t know this. There are also problems in terms of competition: the operator who runs a truck at 50 tonnes has a big advantage over one who follows the law.”

Traffic Data Systems is now entering a scientific research project on using WIM for enforcement which involves several partners: PTB, the German metrology institute; highways research agency BAST; the police; and the city of Hamburg.

The next step for the company is to go for class E and class 5 certification, which would allow for a maximum error of +/- 5% in service. “We don’t want to go to 1% error,” Weiss says. “This is probably not the goal. The more sensors you install, the more precise the results will be.” But there will come a point where the investment is not worth the incremental increase in accuracy, he believes.

Stand 10.321

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.traffic-data-systems.net false http://www.traffic-data-systems.net/ false false%>

For more information on companies in this article

Related Content

  • Tattile unveils Vega1 and the Smartaid
    March 20, 2018
    Leading Italian ITS company and machine vision specialist Tattile has unveiled two major new innovations for the global traffic and enforcement market: the Vega1 and the Smartaid. The Vega1, a dual channel camera built in an extra-compact case to reduce installation impact, is mainly targeted to single lane vehicle tracking, traffic limited areas and priority lanes, as well as surveillance and access control and congestion charge areas.
  • Big bonus with GeBE’s Compact Plus printer
    March 19, 2018
    GeBE now supplies its GeBE Compact Plus printer in a new design, with a pre-assembled presentation unit to prevent damage when handling. Until the final hand-over of the ticket, the presenter keeps the printout back, not allowing the user to pull it too early. If the printout is not taken within a specified time, the sensitive data remains protected by the return transport to the inside of the case using the paper-reject function.
  • ID Tech and IIT Ropar explore IoT and RFID applications for smart cities in India
    February 1, 2019
    Developing smarter cities in India is the goal of a tie-up between smart card company ID Tech and the Institute of Technology (ITT) Ropar, an academic institution in the northern India state of Punjab. ITT Ropar, which specialises in engineering, science and technology, will join ID Tech in looking at how Internet of Things (IoT) and radio frequency identification (RFID) can help. ID Tech director Saurav Khemani says: “We aim to address social challenges posed by rapid urbanisation and economic develo
  • CDoT to trial monitoring system along US toll lanes
    July 2, 2018
    The Colorado Department of Transportation (CDoT) says its trial of dynamic tolling will alleviate congestion and give drivers more reliable travel times. The technology will be implemented along the US 36 between Denver and Boulder and a segment of Interstate 25. Dynamic tolling uses sensors and other measuring devices to assess the amount of traffic on the road and vehicles' speed. The system increases tolls if it detects traffic slowing down in a managed lane which then decreases when there is free mov