Skip to main content

TDS exhibits OIML-R134 certified low- and high-speed WIM system

Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi
March 20, 2018 Read time: 2 mins
Weight expectations: Traffic data systems’ Florian Weiss
4592 Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland.


“We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certification is hard and not every manufacturer of WIM will achieve it. We’ve gone the hard way.”

Legal requirements allow for just one out of 1,000 measurements to be wrong, Weiss says. “There is a huge market in terms of weight-based tolling and enforcement,” he goes on, adding that accurate weighing is useful to the authorities and to operators themselves, in a number of important ways.

“Overloaded vehicles aren’t covered by insurance – a lot of owners and operators don’t know this. There are also problems in terms of competition: the operator who runs a truck at 50 tonnes has a big advantage over one who follows the law.”

Traffic Data Systems is now entering a scientific research project on using WIM for enforcement which involves several partners: PTB, the German metrology institute; highways research agency BAST; the police; and the city of Hamburg.

The next step for the company is to go for class E and class 5 certification, which would allow for a maximum error of +/- 5% in service. “We don’t want to go to 1% error,” Weiss says. “This is probably not the goal. The more sensors you install, the more precise the results will be.” But there will come a point where the investment is not worth the incremental increase in accuracy, he believes.

Stand 10.321

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.traffic-data-systems.net false http://www.traffic-data-systems.net/ false false%>

Related Content

  • April 9, 2019
    ITS America student essay competition: deadline 14 April
    The deadline for US college students to take part in ITS America’s annual essay competition is fast approaching – entries must be in by Sunday 14 April. The competition, sponsored by Southwest Research Institute (SwRI), invites students of transportation, engineering and public policy to share ‘thought provoking’ visions for the future of transport. The topic is: ‘How do you envision disruptive technologies impacting transportation systems to make them safer, greener or smarter over the next 10 years?’ U
  • April 17, 2019
    Intercomp launches LS-WiM system for fleet operators
    Intercomp has launched a low-speed Weigh in Motion (LS-WiM) system which it says allows fleet managers to collect the weight of vehicles without hampering traffic flow. The system is suitable for high-volume entry and exit gates and, unlike full-length truck scales, does not require incoming and outgoing traffic to stop every time a vehicle needs to be weighed, the company adds. According to Intercomp, the system’s small footprint allows it to be installed at most facilities at approximately half
  • September 7, 2014
    Bespoke weigh-in-motion data logger from Kistler
    Kistler is using its booth to highlight to the American market a bespoke weigh-in-motion (WIM) data logger designed to interface with Lineas WIM sensors. The company says this combination allows users to monitor traffic in real time and gather key vehicle data including weight and imbalance, axle loads and spacing, speed and driving behaviour.
  • March 19, 2018
    Kistler Group shows KiTraffic WIM solutions
    The Kistler Group is showcasing its comprehensive KiTraffic Weigh-in-Motion (WIM) solutions, which support road owners and authorities in road and traffic monitoring, weight enforcement and weight-based tolling. The extended service package facilitates a wide range of applications and ensures high performance throughout the system’s lifecycle. KiTraffic Plus is a new WIM solution for automated road monitoring. Applications include weight enforcement and toll-by-weight. With its Lineas quartz sensors, KiTra