Skip to main content

TDS exhibits OIML-R134 certified low- and high-speed WIM system

Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi
March 20, 2018 Read time: 2 mins
Weight expectations: Traffic data systems’ Florian Weiss
4592 Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland.


“We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certification is hard and not every manufacturer of WIM will achieve it. We’ve gone the hard way.”

Legal requirements allow for just one out of 1,000 measurements to be wrong, Weiss says. “There is a huge market in terms of weight-based tolling and enforcement,” he goes on, adding that accurate weighing is useful to the authorities and to operators themselves, in a number of important ways.

“Overloaded vehicles aren’t covered by insurance – a lot of owners and operators don’t know this. There are also problems in terms of competition: the operator who runs a truck at 50 tonnes has a big advantage over one who follows the law.”

Traffic Data Systems is now entering a scientific research project on using WIM for enforcement which involves several partners: PTB, the German metrology institute; highways research agency BAST; the police; and the city of Hamburg.

The next step for the company is to go for class E and class 5 certification, which would allow for a maximum error of +/- 5% in service. “We don’t want to go to 1% error,” Weiss says. “This is probably not the goal. The more sensors you install, the more precise the results will be.” But there will come a point where the investment is not worth the incremental increase in accuracy, he believes.

Stand 10.321

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.traffic-data-systems.net false http://www.traffic-data-systems.net/ false false%>

For more information on companies in this article

Related Content

  • Uber ‘disabled braking system’ in fatal crash
    May 30, 2018
    Uber had disabled the emergency braking function of the Volvo XC90 which killed a pedestrian in Tempe, Arizona in March. A preliminary report from the National Transportation Safety Board (NTSB) says the car was “operating with a self-driving system in computer control mode” when it struck 49-year-old Elaine Herzberg, who was pushing a bicycle across the road. According to the NTSB report, Uber said “emergency braking manoeuvres are not enabled while the vehicle is under computer control, to reduce the
  • Multiple OIML R134 approvals for Intercomp
    September 8, 2020
    In further OIML R134 certifications for the company’s scales and sensors, Intercomp has announced it has received OIML R134 certification for its LS630-WIM scales. Operating in pairs, these scales provide wheel, axle, axle group, and gross vehicle weights (GVW), and are capable of communicating wirelessly to indicators or software.
  • Driven consortium aims to trial AVs in London before Christmas
    November 28, 2018
    The Driven consortium, led by software provider Oxbotica, hopes to trial a fleet of autonomous vehicles (AV) in London before Christmas following successful ongoing tests in Oxford. The vehicles will map streets in the London Borough of Hounslow as part of the consortium’s plans to run a fully autonomous fleet between both cities in 2019. Oxbotica has equipped the vehicles with its autonomous software, radar, lidar sensors and onboard computers and cameras. The fleet will gather data on the contents of
  • Irdeto and Conjure promote Keystone vehicle access solution
    March 19, 2018
    Irdeto and Conjure are using Intertraffic to present what they claim is the most secure, policy-based vehicle access and safety solution in the connected transport industry. Using a mobile device with a companion application, the solution eliminates the need for physical keys to a car while also providing car and fleet owners with the ability to securely and intuitively provision and manage a host of new car sharing/car riding experiences. Keystone combines secure, tamper-proof policy management that