Skip to main content

TDS exhibits OIML-R134 certified low- and high-speed WIM system

Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi
March 20, 2018 Read time: 2 mins
Weight expectations: Traffic data systems’ Florian Weiss
4592 Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland.


“We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certification is hard and not every manufacturer of WIM will achieve it. We’ve gone the hard way.”

Legal requirements allow for just one out of 1,000 measurements to be wrong, Weiss says. “There is a huge market in terms of weight-based tolling and enforcement,” he goes on, adding that accurate weighing is useful to the authorities and to operators themselves, in a number of important ways.

“Overloaded vehicles aren’t covered by insurance – a lot of owners and operators don’t know this. There are also problems in terms of competition: the operator who runs a truck at 50 tonnes has a big advantage over one who follows the law.”

Traffic Data Systems is now entering a scientific research project on using WIM for enforcement which involves several partners: PTB, the German metrology institute; highways research agency BAST; the police; and the city of Hamburg.

The next step for the company is to go for class E and class 5 certification, which would allow for a maximum error of +/- 5% in service. “We don’t want to go to 1% error,” Weiss says. “This is probably not the goal. The more sensors you install, the more precise the results will be.” But there will come a point where the investment is not worth the incremental increase in accuracy, he believes.

Stand 10.321

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.traffic-data-systems.net false http://www.traffic-data-systems.net/ false false%>

For more information on companies in this article

Related Content

  • Kapsch integrates Smart Cities’ mobility
    September 29, 2017
    Kapsch TrafficCom will use the 2017 ITS World Congress Montréal to showcase its integrated mobility solutions for the smart cities and connected communities of the future. Visitors to the company’s booth will experience how Kapsch uses intelligent traffic technologies to improve the way people live, work, move, commute, and interact with each other.
  • Speed limiters mandatory in EU cars by 2022
    March 28, 2019
    Various vehicle safety measures have been given the green light by European policymakers, paving the way for speed limiters in cars by 2022. The European Parliament, Council and Commission have approved the measures, which means such technology as lane assist, drowsiness detection, advanced emergency braking and intelligent speed assistance (ISA – or speed limiters) are expected to be mandatory – if formal approval is granted - in new vehicles in three years’ time. EU commissioner Elżbieta Bieńkowska, res
  • Denso to open automated vehicle technology centre in Tokyo
    November 1, 2018
    Denso is to open a facility at Haneda Airport in Tokyo in June 2020 to develop and test automated driving technologies. The company says the site will feature a building and proving ground for mobility systems research and development. It will also develop automated driving technology researched at its global R&D facility in Tokyo which opened in April. This office was developed to promote collaboration with Denso’s development partners which include automakers, universities, research institutes
  • Waymo gets California green light for public driverless tests
    November 2, 2018
    Waymo has been granted a licence to test fully-driverless cars on public roads in California. It is the first company to be given the green light for such trials in the state – and it means there will be no test driver sitting in the driver’s seat. The permit includes day and night testing on city streets, rural roads and highways with speed limits of up to 65mph. Waymo insists: “Our vehicles can safely handle fog and light rain, and testing in those conditions is included in our permit. We will gradual