Skip to main content

TDS exhibits OIML-R134 certified low- and high-speed WIM system

Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi
March 20, 2018 Read time: 2 mins
Weight expectations: Traffic data systems’ Florian Weiss
4592 Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland.


“We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certification is hard and not every manufacturer of WIM will achieve it. We’ve gone the hard way.”

Legal requirements allow for just one out of 1,000 measurements to be wrong, Weiss says. “There is a huge market in terms of weight-based tolling and enforcement,” he goes on, adding that accurate weighing is useful to the authorities and to operators themselves, in a number of important ways.

“Overloaded vehicles aren’t covered by insurance – a lot of owners and operators don’t know this. There are also problems in terms of competition: the operator who runs a truck at 50 tonnes has a big advantage over one who follows the law.”

Traffic Data Systems is now entering a scientific research project on using WIM for enforcement which involves several partners: PTB, the German metrology institute; highways research agency BAST; the police; and the city of Hamburg.

The next step for the company is to go for class E and class 5 certification, which would allow for a maximum error of +/- 5% in service. “We don’t want to go to 1% error,” Weiss says. “This is probably not the goal. The more sensors you install, the more precise the results will be.” But there will come a point where the investment is not worth the incremental increase in accuracy, he believes.

Stand 10.321

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.traffic-data-systems.net false http://www.traffic-data-systems.net/ false false%>

For more information on companies in this article

Related Content

  • Jenoptik and Telco agree Qatar traffic safety project
    March 19, 2018
    Jenoptik and Telco will deliver more than 120-speed measurement systems to the Qatar Ministry of Interior following an agreement made on the eve of Intertraffic. The systems will be deployed during the second quarter of the year to help improve traffic safety in the Middle East. Through the agreement, Jenoptik will supply radar-based TraffiStar S390 measurement systems for stationary speed enforcement to Telco, including nearly 100 TraffiTower 2.0 and around 20 TraffiCompact housings. The scope of delivery
  • Image Sensing Systems introduces wrong-way alerting solution
    March 20, 2018
    Image Sensing Systems is promoting the addition of a wrong-way alerting solution. An all-in-one system, it provides reliable wrong-way detection on ramps. Drivers wrongfully entering the highway from an off-ramp pose a serious safety risk that can result in severe, and sometimes, fatal accidents. The detection of these wrong-way drivers is vital to reducing these risks. The automatic incident detection (AID) wrong-way alerting solution can monitor any portion of the ramp with a single zone. This module
  • Be-Mobile displays Flowcheck car data application
    March 21, 2018
    Be-Mobile is using Intertraffic to invite visitors to learn more about its range of innovations including a floating car data application. Called Flowcheck, the product, is designed with the intention of enabling users to uncover bottlenecks in their areas and receive insights into city accessibility, the location of where traffic is cutting through residential areas and where it slows down. Additionally, the company’s connected intelligent transport systems platform aims to provide drivers with
  • AVs could make driving ‘more dangerous’: report
    May 23, 2018
    Automated vehicles (AVs) could make driving more dangerous – that is the stark suggestion from a new report by the International Transport Forum (ITF). The report - Safer Roads with Automated Vehicles? – casts doubt on claims that 90% of road deaths could be avoided because the introduction of AVs would eliminate human error. ITF says such claims are at best “untested”.