Skip to main content

TDS exhibits OIML-R134 certified low- and high-speed WIM system

Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi
March 20, 2018 Read time: 2 mins
Weight expectations: Traffic data systems’ Florian Weiss
4592 Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland.


“We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certification is hard and not every manufacturer of WIM will achieve it. We’ve gone the hard way.”

Legal requirements allow for just one out of 1,000 measurements to be wrong, Weiss says. “There is a huge market in terms of weight-based tolling and enforcement,” he goes on, adding that accurate weighing is useful to the authorities and to operators themselves, in a number of important ways.

“Overloaded vehicles aren’t covered by insurance – a lot of owners and operators don’t know this. There are also problems in terms of competition: the operator who runs a truck at 50 tonnes has a big advantage over one who follows the law.”

Traffic Data Systems is now entering a scientific research project on using WIM for enforcement which involves several partners: PTB, the German metrology institute; highways research agency BAST; the police; and the city of Hamburg.

The next step for the company is to go for class E and class 5 certification, which would allow for a maximum error of +/- 5% in service. “We don’t want to go to 1% error,” Weiss says. “This is probably not the goal. The more sensors you install, the more precise the results will be.” But there will come a point where the investment is not worth the incremental increase in accuracy, he believes.

Stand 10.321

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.traffic-data-systems.net false http://www.traffic-data-systems.net/ false false%>

Related Content

  • September 19, 2017
    Traffic Data Systems receives Swiss certification for WIM system
    Traffic Data Systems’ WIM-DSP 32 low-speed and high-speed weigh-in-motion (WIM) system has been awarded an OIML-R134-1 certificate by the Swiss Federal Institute of Metrology, proving accuracy levels of ±5% (initial verification) and ±10% (in-service inspection) have been achieved. The Swiss institute’s supervised certification process required more than 500 test runs with different vehicles, speeds and loads.
  • March 24, 2022
    KiTraffic receives OIML F5 certificate
    Kistler WiM system 'opens up new possibilities' for enforcement, suggests manufacturer
  • March 21, 2018
    Haenni shows lightweight solution for low-speed WIM
    The WL400 is a new portable low-speed weigh-in-motion (WIM) wheel load strip sensor which is making its first appearance at Haenni’s stand in hall 10. Designed for pre-selection of vehicles, the 80mm wide sensor has an accuracy of ±2% (excluding external factors) at speeds of up to 20km/h and a capacity of 30tonnes per axle.
  • March 21, 2018
    Kistler looks for speed camera synergies
    Weigh-in-Motion (WIM) specialist Kistler says its move into speed camera enforcement will help complement its core activities. The firm acquired German company eso, which manufactures portable speed measurement devices, last year, and Tomas Pospisek, Kistler’s global market development manager for road & traffic, says: “We’re hoping this will bring us synergies. We’re monitoring the weight and they’re monitoring the speed. It’s an important step, for sure.” When it comes to WIM, Kistler still maintains ther