Skip to main content

TDS exhibits OIML-R134 certified low- and high-speed WIM system

Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi
March 20, 2018 Read time: 2 mins
Weight expectations: Traffic data systems’ Florian Weiss
4592 Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland.


“We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certification is hard and not every manufacturer of WIM will achieve it. We’ve gone the hard way.”

Legal requirements allow for just one out of 1,000 measurements to be wrong, Weiss says. “There is a huge market in terms of weight-based tolling and enforcement,” he goes on, adding that accurate weighing is useful to the authorities and to operators themselves, in a number of important ways.

“Overloaded vehicles aren’t covered by insurance – a lot of owners and operators don’t know this. There are also problems in terms of competition: the operator who runs a truck at 50 tonnes has a big advantage over one who follows the law.”

Traffic Data Systems is now entering a scientific research project on using WIM for enforcement which involves several partners: PTB, the German metrology institute; highways research agency BAST; the police; and the city of Hamburg.

The next step for the company is to go for class E and class 5 certification, which would allow for a maximum error of +/- 5% in service. “We don’t want to go to 1% error,” Weiss says. “This is probably not the goal. The more sensors you install, the more precise the results will be.” But there will come a point where the investment is not worth the incremental increase in accuracy, he believes.

Stand 10.321

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.traffic-data-systems.net false http://www.traffic-data-systems.net/ false false%>

For more information on companies in this article

Related Content

  • ST adds BYD to Singapore bus consortium
    March 26, 2019
    ST Engineering has added BYD as its first partner in a consortium which seeks to deploy driverless buses in Singapore. The company is equipping BYD’s electric buses with autonomous vehicle technology. The vehicles will operate in the towns of Punggol, Tengah and the Juroung Innovation District located in Singapore’s western corridor. The consortium is being formed following a request from Singapore’s Land Transport Authority and the Singapore Economic Development Board to trial autonomous buses and shut
  • ITS World Congress 2017 - call for papers deadline is 3 March
    February 24, 2017
    There is still time to submit papers for the 24th ITS World Congress 2017 in Montreal, which is hosted by ITS America will host the event from, 29 October to 2 November, with the theme of ‘Integrated Mobility Driving Smart Cities’. If you have undertaken research on an advanced ITS topic, the World Congress International Program Committee invites you to present your findings in Montreal by submitting a paper through the submission website. (link submission.itsworldcongress2017.org.) The Call for Spe
  • APS Group debut’s ‘world’s smallest’ printer at CARTES 2013
    October 31, 2013
    APS Group, a global specialist designer and manufacturer of thermal printer mechanisms and controller boards will be showcasing the World's smallest thermal printer at CARTES 2013. The group's 'super small' SS 205-V4 thermal printer, measures just 68mm wide, 24mm deep and 26mm high, weighing in at only 26 grammes but with a print speed of 110mm per second. APS says further features include new printhead technology, which offers sharper, clearer printouts as well as an easy paper loading and door opening s
  • Volocopter and Fraport to develop ground infrastructure for air taxis
    February 15, 2019
    Volocopter has joined forces with Fraport to develop concepts for the ground infrastructure required to allow air taxis at Frankfurt Airport in Germany. Volocopter says its partnership with German airport manager Fraport will focus on integrating what it calls ‘Volocopter Ports’ into existing infrastructure. The company believes that these could be used in the future to serve as a link between existing urban transportation junctions and provide connections to and from the airport. The Volocopter