Skip to main content

TDS exhibits OIML-R134 certified low- and high-speed WIM system

Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi
March 20, 2018 Read time: 2 mins
Weight expectations: Traffic data systems’ Florian Weiss
4592 Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland.


“We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certification is hard and not every manufacturer of WIM will achieve it. We’ve gone the hard way.”

Legal requirements allow for just one out of 1,000 measurements to be wrong, Weiss says. “There is a huge market in terms of weight-based tolling and enforcement,” he goes on, adding that accurate weighing is useful to the authorities and to operators themselves, in a number of important ways.

“Overloaded vehicles aren’t covered by insurance – a lot of owners and operators don’t know this. There are also problems in terms of competition: the operator who runs a truck at 50 tonnes has a big advantage over one who follows the law.”

Traffic Data Systems is now entering a scientific research project on using WIM for enforcement which involves several partners: PTB, the German metrology institute; highways research agency BAST; the police; and the city of Hamburg.

The next step for the company is to go for class E and class 5 certification, which would allow for a maximum error of +/- 5% in service. “We don’t want to go to 1% error,” Weiss says. “This is probably not the goal. The more sensors you install, the more precise the results will be.” But there will come a point where the investment is not worth the incremental increase in accuracy, he believes.

Stand 10.321

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.traffic-data-systems.net false http://www.traffic-data-systems.net/ false false%>

For more information on companies in this article

Related Content

  • Volocopter to test electric air taxis in Singapore in 2019
    October 22, 2018
    Volocopter will trial its air taxis in Singapore’s urban environments in the second half of 2019. The initiative is expected to lead to public demonstration flights. The company says the eVtols, based on drone technology, can carry two passengers for a distance up to 30 km. These air taxis can manoeuvre safely around skyscrapers to ensure a smooth ride for passengers, Volocopter adds. Volocopter will work with the Civil Aviation Authority of Singapore (CAAS) to establish the scope of the trials
  • Truck driver with foot on dashboard is among 4,000 drivers caught by unmarked HGV Cab
    November 7, 2017
    Highways England has released footage of a truck driver checking his phone while his right foot was on the dashboard. Spotted by Humberside Police, the driver was travelling from the M18 onto the M62 near Goole and is one of 4000 dangerous drivers on UK roads caught by a single unmarked HGV cab over a two year period. Another driver was pulled over by Devon and Cornwall Police and was found to have sent 10 replies to 10 texts within one hour and a driver in Surrey was seen trying to put toothpaste on a to
  • Flir certified system engineer: automatic incident detection and traffic data collection
    January 26, 2017
    Flir is offering two-day training course on incident detection and data collection from 22-23 March at the Novotel in Bruges, Belgium. The interactive and hands-on training aims to provide participants with the ability be able to select the right camera for a project (analogue, IP, thermal), configure the detection boards on a fundamental level and manage received events and data from the detectors. More details and registration information are available on the Flir website. (link http://www.flir.eu/
  • New surge protection products from Emerson
    April 22, 2013
    Emerson Network Power is using its booth at ITS America to highlight its latest surge protection technology (up to 480V) and the evolution of Broadband-Over-Power and Power-Over-Ethernet.