Skip to main content

Solar-powered logging stud

Clearview Traffic has launched the M210 solar-powered logging stud, which the company claims is a unique and innovative solution for accurately counting vehicles on a wide range of roads. As the company points out, on roads which have no counting systems installed, long-term trends are often completely invisible. However, installing a wide network of loop-based traffic counters is often not economically practical due to the costs of installing and maintaining these devices.
June 27, 2012 Read time: 2 mins
557 Clearview Traffic has launched the M210 solar-powered logging stud, which the company claims is a unique and innovative solution for accurately counting vehicles on a wide range of roads. As the company points out, on roads which have no counting systems installed, long-term trends are often completely invisible. However, installing a wide network of loop-based traffic counters is often not economically practical due to the costs of installing and maintaining these devices.

Clearview Traffic's solution combines several technologies, including solar power, radio communications and magnetometer-based vehicle detection. The self-contained M210 solar-powered logging stud is installed into a 13cm diameter hole in the centre of the lane. Once installed, it can count any passing vehicles, recording data in one-minute intervals and storing it within the unit. An integrated solar panel provides power to a high-efficiency rechargeable battery to ensure continuous operation for many years without the need for any form of routine maintenance.

Since the device uses a magnetometer to detect vehicles, it is immune from problems associated with damage to loops including from road degradation, utility works or road repairs. This again reduces the need for road maintenance, with its associated cost and congestion. It is also unobtrusive and less likely to sustain damage from road users as is common with other types of beside-the-road counter.

In order to collect the data from the device, a specially designed radio dongle can be plugged into a USB port to wirelessly communicate to the M210 from up to 10m/30ft away. Data can then be collected, both simply and safely from the roadside, using a simple download application.

Related Content

  • Countering truckers’ parking conundrum
    May 3, 2017
    Colin Sowman hears about a new truck parking information system being piloted across eight states. Legislation limits truck drivers’ hours with the result that they are often caught in a situation where they need to stop either for a break or an overnight rest. But as truck parking is in short supply, truck drivers spend an average of 56 minutes a day searching for available spaces and are often faced with the choice of driving beyond their permitted hours or parking illegally.
  • Cost Benefit: There’s still life in the RSU
    May 24, 2021
    A mixture of mobile and static roadside units may be what’s required to fulfil the needs of connected vehicle communications
  • Radar effective as detection tool for hard shoulder running
    July 23, 2012
    Navtech Radar's millimetric-wave systems are being researched on the M42 in England to look into how this type of detector can assist in the opening of the hard shoulder as an additional running lane. Here, the company's Stephen Clark talks about the technology being used. In England, the Highways Agency's (the HA, an executive agency of the Department for Transport) Managed Motorways system - formerly called Active Traffic Management - uses electronic signs and signals mounted on gantries to direct drivers
  • Coded exchanges
    July 24, 2012
    For many, Ethernet- and IP-based networks are the cast-iron solution to ITS's communications needs. However, there remain issues from manufacturer to manufacturer with interpretation of what are supposed to be common standards The 'promise' of Ethernet was that different devices such as IP video cameras and traffic signals could be easily integrated into communications networks, simplifying the process of transporting data over copper, fibre or wirelessly. However, although Ethernet devices have come to pre