Skip to main content

Solar-powered logging stud

Clearview Traffic has launched the M210 solar-powered logging stud, which the company claims is a unique and innovative solution for accurately counting vehicles on a wide range of roads. As the company points out, on roads which have no counting systems installed, long-term trends are often completely invisible. However, installing a wide network of loop-based traffic counters is often not economically practical due to the costs of installing and maintaining these devices.
June 27, 2012 Read time: 2 mins
557 Clearview Traffic has launched the M210 solar-powered logging stud, which the company claims is a unique and innovative solution for accurately counting vehicles on a wide range of roads. As the company points out, on roads which have no counting systems installed, long-term trends are often completely invisible. However, installing a wide network of loop-based traffic counters is often not economically practical due to the costs of installing and maintaining these devices.

Clearview Traffic's solution combines several technologies, including solar power, radio communications and magnetometer-based vehicle detection. The self-contained M210 solar-powered logging stud is installed into a 13cm diameter hole in the centre of the lane. Once installed, it can count any passing vehicles, recording data in one-minute intervals and storing it within the unit. An integrated solar panel provides power to a high-efficiency rechargeable battery to ensure continuous operation for many years without the need for any form of routine maintenance.

Since the device uses a magnetometer to detect vehicles, it is immune from problems associated with damage to loops including from road degradation, utility works or road repairs. This again reduces the need for road maintenance, with its associated cost and congestion. It is also unobtrusive and less likely to sustain damage from road users as is common with other types of beside-the-road counter.

In order to collect the data from the device, a specially designed radio dongle can be plugged into a USB port to wirelessly communicate to the M210 from up to 10m/30ft away. Data can then be collected, both simply and safely from the roadside, using a simple download application.

Related Content

  • February 26, 2013
    Aberdeen opts for wireless vehicle detection
    After several years’ experience of loop detector failures, primarily identified as being caused by damage from roadworks or degradation of aging road surfaces, Aberdeen City Council opted to use the Golden River M100 wireless detection system from Clearview Traffic. Each compact M100 sensor is typically installed in the middle of a traffic lane where it detects the presence and passage of vehicles and communicates this information wirelessly to the traffic signal controller via an access point and contact c
  • January 24, 2012
    Mini-BlueToad released
    Mini-BlueToad from TrafficCast is an advanced traffic monitoring technology in a small form factor that uses anonymous detection of Bluetooth signals from passing vehicles. The compact device attaches to virtually any existing roadside infrastructure and its battery powers continuous data collection for up to two weeks without a recharge. An optional mini solar panel can recharge the battery for longer studies. Data is stored on a Micro SD card, and downloaded through a simple client interface for analysis
  • April 26, 2013
    ITS asset management matters
    Maintenance of on-road ITS kit needs to become more sophisticated; while new technologies can deliver better road maintenance. David Crawford investigates both sides of the issue "Good information is key to effective ITS asset maintenance,” says Ian Routledge of the Ian Routledge Consultancy (IRC), whose Imtrac (Information Management for TRAffic Control) system is poised for European expansion. Developed as an ‘intelligent filing cabinet’ for storing information about on-road equipment, the online database
  • July 19, 2012
    Wireless traffic management
    Golden River Traffic, part of the Clearview Traffic Group, has unveiled the M100, a new road traffic data collection system that uses secure radio technology as a more reliable, lower cost and easier to install alternative to the use of inductive loops. It can be used for count and classify or for traffic light control and is suitable for all Urban Traffic Control (UTC) systems. Golden River says it offers a likely cost saving across 10 years of installation of as much as 46 per cent.