Skip to main content

Multi-lane VMS from Triplesign

A segregated, mechanical three-position variable message sign able to display lane closures and other instructions is making its debut on the Triplesign stand. An electric motor turns the vertical triangular elements in the sign to display the required message and in the latest incarnation a set of three vertical elements depicts each lane of the road and can be individually controlled to indicate which lanes are open or closed.
March 26, 2014 Read time: 2 mins
P-A Claveroth highlighting Triplesign’s VMS, which can be pre-programed or controlled from a mobile phone
A segregated, mechanical three-position variable message sign able to display lane closures and other instructions is making its debut on the 7697 Triplesign stand.

An electric motor turns the vertical triangular elements in the sign to display the required message and in the latest incarnation a set of three vertical elements depicts each lane of the road and can be individually controlled to indicate which lanes are open or closed.

Unlike digital VMS, the Triplesign only consumes energy when rotating the elements to change the display allowing the entire sign can run from a single 12V battery (with a solar panel for trickle recharging if required). The display can be either be programed to show particular messages at certain times and days (such as outside schools) or changed as required using a mobile phone.

In remote areas where there is no available power, Triplesign’s sales director P-A Claveroth, says the total cost of installing one of its signs can be as little as 25% that of deploying digital VMS in the same location.
www.triplesign.com

For more information on companies in this article

Related Content

  • TSS shows Aimsun Online real-time traffic management system
    September 8, 2014
    TSS-Transport Simulation Systems is showcasing its Aimsun Online real-time decision support system for traffic management. One of the most high-profile traffic management projects to use Aimsun Online as its prediction engine is the award-winning Interstate 15 Integrated Corridor Management (ICM) project led by the San Diego Association of Governments (SANDAG). At the core of the project is the configuration and implementation of a Decision Support System (DSS) using Aimsun Online.
  • Iteris secures $2.45m ATIS deal
    May 20, 2012
    Iteris will design, implement, operate and maintain a new travel information and navigation service for the Abu Dhabi Department of Transport—the first such system in the Middle East. The service will be similar to a new traveler information and 511 system Iteris is deploying in Virginia.
  • Swarco’s control signal system wins Netherlands motorway approval
    March 25, 2014
    The highly sophisticated control and signalling system developed by Swarco is now homologated to meet the tough Rijkswaterstaat WKS 1.3 specification for use on highways in the Netherlands. The requirements of this specification have been in place since January 2013 for use with regard to motorway signalling systems and roadside equipment.
  • HERMES Study provides guidance for forward ITS thinking in Finland
    August 25, 2016
    Having authored HERMES, a major study for the Finnish Ministry of Transport and Communication, Josef Czako talks to ITS International about his findings and lessons for other authorities. When CEOs of major automakers are predicting more change in the next five years than in the past 50, what is the role of national authorities considering the benefits of innovations in ITS?