Skip to main content

Multi-lane VMS from Triplesign

A segregated, mechanical three-position variable message sign able to display lane closures and other instructions is making its debut on the Triplesign stand. An electric motor turns the vertical triangular elements in the sign to display the required message and in the latest incarnation a set of three vertical elements depicts each lane of the road and can be individually controlled to indicate which lanes are open or closed.
March 26, 2014 Read time: 2 mins
P-A Claveroth highlighting Triplesign’s VMS, which can be pre-programed or controlled from a mobile phone
A segregated, mechanical three-position variable message sign able to display lane closures and other instructions is making its debut on the 7697 Triplesign stand.

An electric motor turns the vertical triangular elements in the sign to display the required message and in the latest incarnation a set of three vertical elements depicts each lane of the road and can be individually controlled to indicate which lanes are open or closed.

Unlike digital VMS, the Triplesign only consumes energy when rotating the elements to change the display allowing the entire sign can run from a single 12V battery (with a solar panel for trickle recharging if required). The display can be either be programed to show particular messages at certain times and days (such as outside schools) or changed as required using a mobile phone.

In remote areas where there is no available power, Triplesign’s sales director P-A Claveroth, says the total cost of installing one of its signs can be as little as 25% that of deploying digital VMS in the same location.
www.triplesign.com

Related Content

  • March 26, 2014
    Sick shows smart sensors at Intertraffic
    Sick is highlighting three innovations on its stand: an automated hot spot detector, an integrated tunnel sensor and a vehicle profiling system. The VHD Pro (vehicle hotspot detector) combines laser-based 3D modelling and infrared imaging to automatically differentiate between allowable hot spots (such as engines and transmissions) and those which could result in a fire. Without the need for human oversight, the system can detect a worrying hot spot (brakes or load) on a vehicle in less than five seconds. T
  • October 29, 2014
    One step ahead in ITS with Smartek and Sony
    Smartek Vision’s industrial GigE camera GCP1931 with Sony’s ¬ first image sensor based on CMOS technology with global shutter provides a cost-effective camera for traf¬fic surveillance in all lighting conditions. With 2.3MP resolution at a high frame rate of 50fps, high sensitivity due to the Sony Exmor technology and large pixels of 5.86μm, Smartek Vision utilises the full bandwidth of Gigabit Ethernet based on the GigE Vision standard as a proven data interface. The sensor and the camera design
  • September 9, 2014
    Michigan DoT implements truck parking initiative
    A new project is balancing up the needs of truckers wanting a break from the road and the availability of parking spots in Michigan. Commercial truck drivers typically require around 30 minutes to find somewhere to stop for a rest. They frequently find that the five public rest areas on the heavily-trafficked 129-mile stretch of I-94 in southwest Michigan, which carries around 10,000 trucks a day in the Canada-Detroit-Chicago corridor, are full.
  • March 26, 2014
    Banner Engineering shows range of sensing solutions
    Banner Engineering develops a whole series of sensing solutions for many different traffic and parking management applications. Products are based on a range of sensing types, including photo-electrics, ultrasound, radar and magneto-resistance. These are combined with wireless communication modules to produce solutions for: on- and off-street parking; vehicle detection and counting for tolling and free-flow applications; control of dynamic signage, traffic signals and way-finding applications; access and ex