Skip to main content

Multi-lane VMS from Triplesign

A segregated, mechanical three-position variable message sign able to display lane closures and other instructions is making its debut on the Triplesign stand. An electric motor turns the vertical triangular elements in the sign to display the required message and in the latest incarnation a set of three vertical elements depicts each lane of the road and can be individually controlled to indicate which lanes are open or closed.
March 26, 2014 Read time: 2 mins
P-A Claveroth highlighting Triplesign’s VMS, which can be pre-programed or controlled from a mobile phone
A segregated, mechanical three-position variable message sign able to display lane closures and other instructions is making its debut on the 7697 Triplesign stand.

An electric motor turns the vertical triangular elements in the sign to display the required message and in the latest incarnation a set of three vertical elements depicts each lane of the road and can be individually controlled to indicate which lanes are open or closed.

Unlike digital VMS, the Triplesign only consumes energy when rotating the elements to change the display allowing the entire sign can run from a single 12V battery (with a solar panel for trickle recharging if required). The display can be either be programed to show particular messages at certain times and days (such as outside schools) or changed as required using a mobile phone.

In remote areas where there is no available power, Triplesign’s sales director P-A Claveroth, says the total cost of installing one of its signs can be as little as 25% that of deploying digital VMS in the same location.
www.triplesign.com

For more information on companies in this article

Related Content

  • Vienna’s first electric bus goes into operation
    October 31, 2012
    The first electric bus (eBus) to be used in Austria’s capital city of Vienna has been put into service by the municipal transport authority, Wiener Linien, the first operator in Europe to implement and integrate eBuses into scheduled service. Designed and developed by Siemens Rail Systems and bus manufacturer Rampini, the vehicle is the first of twelve with which Wiener Linien intends to move two of the city's bus services to electric power by the summer of 2013. The vehicle’s total energy requirement is st
  • Road user charging made simple with e-Vignette
    October 19, 2012
    German company Ages Maut System will promote the e-Vignette as an intelligent solution for road user charging (RUC). As the company points out, the e-Vignette has the advantage of simplicity while achieving high compliance from drivers. In comparison with distance-based charging systems, a costly on-board unit is not required; also, no interaction with roadside infrastructure is necessary and data protection is achieved without technical complexity. Ages Maut says the system is ideal for countries which w
  • ITS asset management matters
    April 26, 2013
    Maintenance of on-road ITS kit needs to become more sophisticated; while new technologies can deliver better road maintenance. David Crawford investigates both sides of the issue "Good information is key to effective ITS asset maintenance,” says Ian Routledge of the Ian Routledge Consultancy (IRC), whose Imtrac (Information Management for TRAffic Control) system is poised for European expansion. Developed as an ‘intelligent filing cabinet’ for storing information about on-road equipment, the online database
  • Colas to trial solar road
    July 14, 2016
    UK highways services provider Colas is set to start trialling its innovative solar road solution, Wattway and is in the process of identifying potential sites with clients interested in the photovoltaic road surfacing. According to Colas, the technology provides clean, renewable energy in the form of electricity, while allowing for all types of road traffic. Installed on top of an existing road surface, the solar panels are extremely lightweight and strong. Designed and tested to endure vehicles co