Skip to main content

Multi-lane VMS from Triplesign

A segregated, mechanical three-position variable message sign able to display lane closures and other instructions is making its debut on the Triplesign stand. An electric motor turns the vertical triangular elements in the sign to display the required message and in the latest incarnation a set of three vertical elements depicts each lane of the road and can be individually controlled to indicate which lanes are open or closed.
March 26, 2014 Read time: 2 mins
P-A Claveroth highlighting Triplesign’s VMS, which can be pre-programed or controlled from a mobile phone
A segregated, mechanical three-position variable message sign able to display lane closures and other instructions is making its debut on the 7697 Triplesign stand.

An electric motor turns the vertical triangular elements in the sign to display the required message and in the latest incarnation a set of three vertical elements depicts each lane of the road and can be individually controlled to indicate which lanes are open or closed.

Unlike digital VMS, the Triplesign only consumes energy when rotating the elements to change the display allowing the entire sign can run from a single 12V battery (with a solar panel for trickle recharging if required). The display can be either be programed to show particular messages at certain times and days (such as outside schools) or changed as required using a mobile phone.

In remote areas where there is no available power, Triplesign’s sales director P-A Claveroth, says the total cost of installing one of its signs can be as little as 25% that of deploying digital VMS in the same location.
www.triplesign.com

For more information on companies in this article

Related Content

  • Control rooms adapt to tech changes
    July 8, 2019
    From IP-based systems to an increasing array of choice, traffic and transit management has changed a lot in the last few years. Adam Hill talks to some of the leading players in the control room business
  • Vendeka seeks expansion after European passive RFID-based tolling project
    October 24, 2012
    Turkish company Vendeka is looking to expand its operations internationally after completing what it describes as the first passive RFID-based tolling project in Europe. The company installed the system on the Bosphorus Bridge, which links Europe and Asia. Previously, tolling was achieved by a card-based system, but traffic jams were caused by drivers stopping to place their cards in the readers. This has been replaced by Vendeka’s passive RFID system. A major advantage, says Vendeka, is that a passive RFID
  • Tattile targets machine vision
    October 29, 2014
    Tattile’s wide range of camera systems for machine vision use includes the Tag-7 linear camera series and the S200 smart camera range. TAG-7 is a linear CCD CameraLink compact digital camera with a linear 2 megapixel CCD sensor, and is designed to meet the main requirements of machine vision.
  • AISIN demonstrates array of automatic detection for road safety
    October 23, 2012
    Vehicle technology manufacturer AISIN is exhibiting a complete array of sensor technology for road safety, including a system that detects if a driver has stopped breathing or suffered a heart attack. Highly sensitive sensors in the driver’s seat pick up on loss of cardiac, pulmonary or body movement, which could then activate vehicle braking while alerting emergency services. “There have been very serious road accidents caused by drivers having heart attacks or suffering other illnesses and losing control