Skip to main content

Haenni shows lightweight solution for low-speed WIM

The WL400 is a new portable low-speed weigh-in-motion (WIM) wheel load strip sensor which is making its first appearance at Haenni’s stand in hall 10. Designed for pre-selection of vehicles, the 80mm wide sensor has an accuracy of ±2% (excluding external factors) at speeds of up to 20km/h and a capacity of 30tonnes per axle.
March 21, 2018 Read time: 1 min
Scaling up: Daniel Kneubül
The WL400 is a new portable low-speed weigh-in-motion (WIM) wheel load strip sensor which is making its first appearance at 8707 Haenni’s stand in hall 10. Designed for pre-selection of vehicles, the 80mm wide sensor has an accuracy of ±2% (excluding external factors) at speeds of up to 20km/h and a capacity of 30tonnes per axle.


The complete system weighs only 80kg and comprises of two sensors, a position frame and four levelling mats – effectively removing the need for a fixed installation although the sensor can be installed in the road for permanent locations such as tolling and freight management applications.  All areas of the 1.25m long sensor can withstand being run over as it does not include the readout because the results are conveyed to a PC via a rugged cable.

Stand 10.516

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.haenni-scales.com false http://www.haenni-scales.com/ false false%>

For more information on companies in this article

Related Content

  • Instamac promotes UltraCrete repair product
    March 22, 2018
    UK company Instarmac International is promoting its UltraCrete Instant Road Repair pothole repair product and offering it to licensees worldwide. UltraCrete is a first-time permanent repair that has been continuously developed over the past 40 years and used around the world. It is used on a daily basis in all climates, from the snowbound island of Hokkaido in Japan, to the tropical monsoon-hit roads of Malaysia and the heat of the Namibian desert. UltraCrete repairs can be returned to operational use
  • Watts Street Furniture features Impact Flex Bollard
    March 19, 2018
    Watts Street Furniture, a first-time exhibitor here at Intertraffic, is featuring its Impact Flex Bollard. This 100% weather-proof, scratch-resistant bollard can be driven over/hit and will revert back to the upright position again without causing any damage to the ground or the bollard itself.
  • Webinar: Automation at ITS European Congress
    June 16, 2014
    A webinar organised by Ertico-ITS Europe at 1600 on 20 June will provide an overview of the main topics on Automation discussed during the ITS European Congress, highlighting the main outcomes of different initiatives organised during the Congress. The speakers, Dr Maxime Flament of Ertico-ITS Europe and Dr Lytrivis Panagiotis of ICCS, will share their views and provide feedback on events at the Congress. They will also debate the current progress in different areas relating to successful and sustainable
  • Speed cameras targeted by French ‘yellow vest’ protesters
    January 14, 2019
    Protesters in France have put more than half of the country’s speed cameras out of action, according to the country’s authorities. Interior minister Christophe Castaner said that almost 60% of France’s 3,200 cameras have been affected, the BBC reports. Castaner said that the cameras had been “neutralised, attacked, or destroyed” by ‘yellow vest’ protesters in a move which threatened road safety. Motorists are required by law to keep high-visibility vests, or ‘gilets jaunes’ in their cars. These yel