Haenni shows lightweight solution for low-speed WIM

The WL400 is a new portable low-speed weigh-in-motion (WIM) wheel load strip sensor which is making its first appearance at Haenni’s stand in hall 10. Designed for pre-selection of vehicles, the 80mm wide sensor has an accuracy of ±2% (excluding external factors) at speeds of up to 20km/h and a capacity of 30tonnes per axle.
March 21, 2018 Read time: 1 min
Scaling up: Daniel Kneubül
The WL400 is a new portable low-speed weigh-in-motion (WIM) wheel load strip sensor which is making its first appearance at 8707 Haenni’s stand in hall 10. Designed for pre-selection of vehicles, the 80mm wide sensor has an accuracy of ±2% (excluding external factors) at speeds of up to 20km/h and a capacity of 30tonnes per axle.


The complete system weighs only 80kg and comprises of two sensors, a position frame and four levelling mats – effectively removing the need for a fixed installation although the sensor can be installed in the road for permanent locations such as tolling and freight management applications.  All areas of the 1.25m long sensor can withstand being run over as it does not include the readout because the results are conveyed to a PC via a rugged cable.

Stand 10.516

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.haenni-scales.com false http://www.haenni-scales.com/ false false%>

For more information on companies in this article

Related Content

  • More cables in existing ducting with MaxCell’s no-dig CSRS
    April 23, 2013
    CSRS is a new no-dig technology and construction method from MaxCell that removes inner ducting from around active fiber optic cables with virtually no load on cable and no interruption of service. Inner ducts can be are removed at a rate of up to 3m (10ft) per min and up to 90% conduit space is recovered. The cables fall to bottom of conduit allowing up to nine more cables to be placed in recovered space. Replacing with new ducting can cost upwards of $3000 per metre ($1,000 per foot) in cities.
    Read More
  • NTSB: Uber’s AV in fatal crash ‘had software issues’
    November 6, 2019
    The US National Transportation Safety Board (NTSB) has found that an Uber autonomous vehicle which killed Elaine Herzberg last year had software flaws. NTSB released a report which says the Volvo XC60’s autonomous system software classified the pedestrian as an unknown object and determined that an emergency braking manoeuvre was needed to mitigate the collision. Uber confirmed that emergency braking manoeuvres must be carried out manually and the system is not designed to alert the driver. Data
    Read More
  • Boeing and Kitty Hawk partner on air urban mobility
    July 10, 2019
    Boeing has joined forces with California-based Kitty Hawk with the aim of advancing air urban mobility. Steve Nordlund, vice president and general manager of Boeing Next, a subsidiary focusing on exploring urban air mobility, says the partners will focus on "safely advancing the future of mobility". Kitty Hawk's range of electric transportation solutions includes Cora, a two-seated air taxi, and Flyer, a vehicle for personalised flight. In January, Boeing completed a test flight of its autonomous
    Read More
  • ADN says Bled will improve public transit efficiency
    April 23, 2019
    ADN Mobile Solutions has developed Bled, a technical solution which – in conjunction with bespoke training and gamification tools – is designed to help bus drivers improve their driving efficiency. The goal is to reduce public transit emissions and provide cost savings, monitoring the way that vehicles are driven, and picking up on activities such as sharp braking or acceleration, giving personalised recommendations based on driving context. Electronic and mechanical data from buses is analysed and presente
    Read More

Highlighted Content