Haenni shows lightweight solution for low-speed WIM

The WL400 is a new portable low-speed weigh-in-motion (WIM) wheel load strip sensor which is making its first appearance at Haenni’s stand in hall 10. Designed for pre-selection of vehicles, the 80mm wide sensor has an accuracy of ±2% (excluding external factors) at speeds of up to 20km/h and a capacity of 30tonnes per axle.
March 21, 2018 Read time: 1 min
Scaling up: Daniel Kneubül
The WL400 is a new portable low-speed weigh-in-motion (WIM) wheel load strip sensor which is making its first appearance at 8707 Haenni’s stand in hall 10. Designed for pre-selection of vehicles, the 80mm wide sensor has an accuracy of ±2% (excluding external factors) at speeds of up to 20km/h and a capacity of 30tonnes per axle.


The complete system weighs only 80kg and comprises of two sensors, a position frame and four levelling mats – effectively removing the need for a fixed installation although the sensor can be installed in the road for permanent locations such as tolling and freight management applications.  All areas of the 1.25m long sensor can withstand being run over as it does not include the readout because the results are conveyed to a PC via a rugged cable.

Stand 10.516

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.haenni-scales.com false http://www.haenni-scales.com/ false false%>

Related Content

  • March 20, 2018
    Iwim fibre optic solution for WIM stability
    Italian exhibitor Iwim is exhibiting a new fibre-optic based weigh-in-motion system called the 50_10. Certified to OIML R134 class 10, the system can weigh heavy vehicles with up to five axles at speeds between five and 50km/h (weigh readouts of vehicles travelling above 50km/h are not OIML certified). According to the company, the use of fibre optic technology means the system is not affected by electromagnetic interference or temperature variations, there are no electric cables running to the
    Read More
  • March 20, 2018
    Iwim fibre optic solution for WIM stability
    Italian exhibitor Iwim is exhibiting a new fibre-optic based weigh-in-motion system called the 50_10. Certified to OIML R134 class 10, the system can weigh heavy vehicles with up to five axles at speeds between five and 50km/h (weigh readouts of vehicles travelling above 50km/h are not OIML certified). According to the company, the use of fibre optic technology means the system is not affected by electromagnetic interference or temperature variations, there are no electric cables running to the
    Read More
  • April 17, 2019
    Intercomp launches LS-WiM system for fleet operators
    Intercomp has launched a low-speed Weigh in Motion (LS-WiM) system which it says allows fleet managers to collect the weight of vehicles without hampering traffic flow. The system is suitable for high-volume entry and exit gates and, unlike full-length truck scales, does not require incoming and outgoing traffic to stop every time a vehicle needs to be weighed, the company adds. According to Intercomp, the system’s small footprint allows it to be installed at most facilities at approximately half
    Read More
  • March 20, 2018
    TDS exhibits OIML-R134 certified low- and high-speed WIM system
    Traffic Data Systems is exhibiting its OIML-R134 certified low- and high-speed Weigh-In-Motion (WIM) system at Intertraffic 2018. Designed for a speed range from 5km/h to 120 km/h for HGVs, WIM-DSP 32/TMCS-U has been certified by the Federal Institute of Metrology (METAS) in Switzerland. “We’ve done WIM for almost 20 years,” says Florian Weiss, CEO of Traffic Data Systems. “The key thing at Intertraffic is to show customers that there is a system available with the certification they’ve asked for. Certifi
    Read More

Highlighted Content