Skip to main content

Cestel showcases non-invasive WIM solution for bridges

Cestel says its MkIII SiWIM technology turns any bridge into a fully automatic weigh-in-motion system without disturbing the road surface. Sensors are fixed to the underside of the bridge deck beneath up to four lanes of traffic and the system is calibrated with vehicles of known weight passing individually, in opposite directions and in various combinations depending on the road layout. Having been calibrated, an algorithm then interprets the information to determine the number, weights, speed and
March 21, 2018 Read time: 2 mins
8705 Cestel says its MkIII SiWIM technology turns any bridge into a fully automatic weigh-in-motion system without disturbing the road surface.

Sensors are fixed to the underside of the bridge deck beneath up to four lanes of traffic and the system is calibrated with vehicles of known weight passing individually, in opposite directions and in various combinations depending on the road layout. Having been calibrated, an algorithm then interprets the information to determine the number, weights, speed and direction of passing vehicles and the cumulative load on the bridge deck.

The system can be configured with or without cameras and is said to be easily relocated from one bridge to another (only requiring re-calibration).

Measured gross vehicle weights (above 3.5t) are said to be within 7%, individual axles within 11% and group axles within 10%. Speed measurement are within 2% and vehicles can be divided into an unlimited number of categories.

Stand: 12.614

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.siwim.com Cestel website link false https://www.cestel.eu/ false false%>

For more information on companies in this article

Related Content

  • TRL and TomTom announce partnership on Congestion Index
    October 23, 2012
    TRL and TomTom have announced here at the ITS World Congress that they have launched a new partnership to offer more detailed analyses of the results published in TomTom’s quarterly Congestion Index which covers major metropolitan areas in Europe and North America. The partners say the collaboration will see the Congestion Index being put to practical use in solving local congestion issues. TRL traffic consultants are able to work with detailed TomTom data to produce customised analysis which meets the need
  • Eastlink launches self-driving survey, Australia
    September 11, 2017
    Toll route operator Eastlink, with support from Australian Road Research Board, has launched the first of an annual Victorian self-driving vehicle survey for Victorian motorists’ attitudes to and perceptions of self-driving vehicles, to be completed 8 October 2017. The first major survey is aimed at motorists, irrespective of whether they use Eastlink and will be repeated annually to track changes into the future
  • La Sécurité Routière calls for self-driving cars to pass driving test
    April 11, 2018
    French safety agency La Sécurité Routière has proposed that autonomous vehicles (AVs) should be made to pass a standard driving test before deployment on roads – according to a report by The European Traffic Police Network (TISPOL). Through the proposed test, AVs would be set to autopilot mode and be required to participate in a driving examination. Manoeuvres, different driving speeds, parking and navigation would all be under scrutiny.
  • Stalker Radar shows the Radar SE-1 solution
    March 19, 2018
    A step-by-step setup wizard and TCP/IP remote control make the Phodar SE-1, an easily configured and deployed traffic photo enforcement solution. All settings necessary to immediately begin violation evidence collection are covered by the wizard. Being highlighted on Stalker Radar’s stand here at Intertraffic Amsterdam, the SE-1 is a sophisticated, compact 3D tracking radar, with a high-resolution camera, video analytics with optional ALPR, with everything managed by a powerful embedded processor.