CA Traffic displays BlackCAT Traffic Monitor

At CA Traffic cycle detection has always had a strong focus as visitors to the company’s stand here at Intertraffic will see. As CA Traffic points out, the increase in cycle safety projects has led to new developments and advanced hardware deployment utilising multiple detection technologies for a vast number of scenarios. The BlackCAT Traffic Monitor uses inductive loop technology to provide cycle detection at permanent sites. In its simplest form this allows bicycles to be detected and reported historical
April 5, 2016 Read time: 2 mins
Kyranjeet Sanghera of CA Traffic

At 521 CA Traffic cycle detection has always had a strong focus as visitors to the company’s stand here at Intertraffic will see. As CA Traffic points out, the increase in cycle safety projects has led to new developments and advanced hardware deployment utilising multiple detection technologies for a vast number of scenarios.

The BlackCAT Traffic Monitor uses inductive loop technology to provide cycle detection at permanent sites. In its simplest form this allows bicycles to be detected and reported historically or in real time over GSM/GPRS/3G. Furthermore, the BlackCAT offers direct outputs via an optional switch card to trigger variable message signs at the roadside to alert motorists of nearby cycle traffic. In addition, BlackCAT devices can also be used to monitor both vehicles in roads and cycles on an adjacent cycle lane at the same time.

In addition to all this, new radar technology has been utilised to allow the detection of cycles on dedicated cycle paths, eliminating the need to install in-ground sensors. As well as for battery powered temporary surveys, a solar/mains solution with GPRS communications is available to make this a viable permanent detection method.

At the other end of the scale is the tried and tested pneumatic tube event vehicle recorder (EVR). By deploying pneumatic tubes on a road or cycle path, axle hits are recorded and the data processed by analysis software. Cycles are detected alongside vehicles to a very high accuracy. These robust units are housed within a weatherproof case and offer sustained operation on a single battery for one year.

For more information on companies in this article

Related Content

  • Tech combo used to target overweight vehicles
    November 7, 2013
    UK enforcement agency VOSA is using a combination of ANPR and weigh-in-motion technology to detect and target overweight trucks on some of the busiest motorways.
    Read More
  • Tech combo used to target overweight vehicles
    November 7, 2013
    UK enforcement agency VOSA is using a combination of ANPR and weigh-in-motion technology to detect and target overweight trucks on some of the busiest motorways. Overloaded vehicles pose a potential danger to drivers, other road users and pedestrians.
    Read More
  • Sterela weighs in to Wallonia
    March 31, 2022
    Sterela says that its GlobalWIM High Speed Weigh-In-Motion solution is now type-approved for direct enforcement in Wallonia, the French-speaking region of Belgium. The metrological optimisation of the system has been successfully achieved and the first site is now legally operational.
    Read More
  • ITS technology reduces congestion, improves workzone safety
    July 17, 2012
    As the road-building season gets under way in the US, the Federal Highway Administration has just published a White Paper which deals with the use of ITS technology in work zones. On 30 April 2009, the US Federal Highway Administration (FHWA) published a White Paper which was prepared by the US Department of Transportation (USDOT) to inform public agencies about the use of ITS to manage construction work zones. This is a particularly relevant topic given the large number of construction projects that are ex
    Read More

Highlighted Content