Baumer's LX cameras for inspection tasks

Baumer’s LX cameras are expected to offer high resolutions and frame rates up to 337fps and 3D algorithms for inspections in railway networks and catenary infrastructure. The company says the global shutter CMOS cameras provide resolutions up to 48 megapixel for inspecting tracks, rails and catenary wires. Also, the LX models come with exposure times of less than 10 µs for precise image acquisition even at high speed. For inspections of pantographs, wheels or brakes, the LX 3D cameras use laser triangula
October 25, 2018 Read time: 2 mins
8526 Baumer’s LX cameras are expected to offer high resolutions and frame rates up to 337fps and 3D algorithms for inspections in railway networks and catenary infrastructure.


The company says the global shutter CMOS cameras provide resolutions up to 48 megapixel for inspecting tracks, rails and catenary wires. Also, the LX models come with exposure times of less than 10 µs for precise image acquisition even at high speed.

For inspections of pantographs, wheels or brakes, the LX 3D cameras use laser triangulation at up to 4K line length resolution and profile rates of more than 2.5kHz at 128 lines. They also capture damage or wear and tear and at high speed.

In catenary infrastructure scenarios, the cameras can inspect proper geometry, breakage or deformation. LX, featuring bandwidths up to 10Gbit/s, carries out high-speed image transmission while reducing evaluation time, the company adds.

According to Baumer, LX is based on the image quality of Sony’s Pregius sensors to provide reliable character recognition.

The cameras also come with a dynamic range of more than 70dB to operate in outdoor environments with changing light conditions.

Stand: 1F32

For more information on companies in this article

Related Content

  • Sony introduces new GS CMOS cameras for advanced machine vision applications
    March 18, 2016
    Sony Europe’s Image Sensing Solutions Division’s new GS CMOS series cameras are targeted at the machine vision market and are said to be suited to applications including intelligent transport systems, logistics and high-end security.
    Read More
  • Point Grey increases CCD sensitivity
    May 31, 2013
    Point Grey’s new addition to its Grasshopper3 camera family, the Grasshopper3 GS3-U3-28S5, features high quality, high resolution CCD sensors with a USB 3.0 interface. The new camera models are based on colour and monochrome versions of the fast and highly sensitive Sony ICX674, a 2/3” CCD featuring 4.54 micron square pixels and capable of sending 1932 x 1452 images at 26 FPS. The ICX674 sensor supports high definition (HD) 1080p30 imaging and uses Sony’s EXview HAD CCD II technology to improve quantum effi
    Read More
  • Polarisation is glaringly obvious, says Sony
    December 3, 2018
    Glare from the sun is a factor in a large number of road accidents – many of them fatal. But there is a solution at hand: using polarisation can mitigate the effect of glare and improve ITS camera enforcement, explains Stephane Clauss The effect of glare on driver safety has been well documented. A 2013 UK study by the country’s largest driver organisation, the AA, calculated sun glare was a contributing cause in almost 3,000 road accidents in 2012 alone. This represented one in 33 accidents on Britain’s
    Read More
  • Cepton and Belam boost railway safety
    September 28, 2021
    Cepton says the system has achieved an accuracy of over 99.9% in obstacle detection
    Read More

Highlighted Content