Skip to main content

Accurate vehicle detection with Radix wired sensors

Radix Traffic will be featuring at Intertraffic Amsterdam its wired magnetometer sensors, over 500 of which have been installed in the UK to provide accurate vehicle detection. Unlike conventional inductive loops, the sensors can be installed around 50cm below the road surface where they are protected from damage caused by bad weather and heavy traffic. Radix claims that once a sensor is installed it will continue to detect during its 15-year design life with no maintenance required. Radix says installat
February 8, 2016 Read time: 2 mins
8326 Radix Traffic will be featuring at Intertraffic Amsterdam its wired magnetometer sensors, over 500 of which have been installed in the UK to provide accurate vehicle detection. Unlike conventional inductive loops, the sensors can be installed around 50cm below the road surface where they are protected from damage caused by bad weather and heavy traffic. Radix claims that once a sensor is installed it will continue to detect during its 15-year design life with no maintenance required.

Radix says installation is quick and simple and with no slot cutting involved, lane closure and traffic management is not normally required. For a growing number of access control and parking applications, the sensors are also being mounted either above or adjacent to entrance and exit ramps, delivering reliability and through-life cost benefits to car park operators and site owners.

As the company points out, being wired, this technology does not need regular battery replacement or costly wireless repeaters, and is rapidly becoming the detector of choice in countries as far apart as the UK and Australia.

Related Content

  • March 20, 2014
    Additional functionality gives loops a continued lease of life
    Two decades after the death of the inductive loops was predicted, Matt Zinn, technical services manager at Eberle Design says the technology still offers advantages. More than 20 years ago the emergence of video detection systems led many to foretell the end of inductive loops. In the intervening years advocates of radar, infrared and wireless detection technologies have also claimed that loops were on their way out. But in fact, by all calculations, the use of loops has actually increased and although
  • January 31, 2012
    Solar-powered traffic detection improves communication
    Pete Goldin reports on a new wireless, solar-powered traffic detection system being used by Caltrans District 12. As more and more traffic data is necessary to satisfy the needs of traffic management centres and traveller information systems, and as traffic detection technology becomes more ubiquitous, transportation authorities are pressured to find more economical ways of expanding their detection systems. Caltrans District 12 is leading this push by deploying the latest detection system from Case Global
  • July 23, 2012
    Radar effective as detection tool for hard shoulder running
    Navtech Radar's millimetric-wave systems are being researched on the M42 in England to look into how this type of detector can assist in the opening of the hard shoulder as an additional running lane. Here, the company's Stephen Clark talks about the technology being used. In England, the Highways Agency's (the HA, an executive agency of the Department for Transport) Managed Motorways system - formerly called Active Traffic Management - uses electronic signs and signals mounted on gantries to direct drivers
  • June 27, 2012
    Solar-powered logging stud
    Clearview Traffic has launched the M210 solar-powered logging stud, which the company claims is a unique and innovative solution for accurately counting vehicles on a wide range of roads. As the company points out, on roads which have no counting systems installed, long-term trends are often completely invisible. However, installing a wide network of loop-based traffic counters is often not economically practical due to the costs of installing and maintaining these devices.