Skip to main content

VTT participates in biofuel production technology project

The VTT Technical Research Centre of Finland is participating in the EU-funded project COMSYN, which aims to develop a production concept for competitive bio-based fuels by means of a compact gasification and synthesis process. The target reduction of the biofuel production cost is up to 35 per cent compared to alternative routes, which translates to less than 0.80 €/l production cost for diesel.
September 15, 2017 Read time: 2 mins

The VTT Technical Research Centre of Finland is participating in the EU-funded project COMSYN, which aims to develop a production concept for competitive bio-based fuels by means of a compact gasification and synthesis process. The target reduction of the biofuel production cost is up to 35 per cent compared to alternative routes, which translates to less than 0.80 €/l production cost for diesel.

The production concept is based on the distributed primary conversion of various kind of biomass residues to intermediate liquid products at small-to-medium scale (10-50 kt/a Fischer-Tropsch products, 30–150 MW biomass) units located close to biomass resources. The Fischer-Tropsch products will be upgraded to fuels in existing central oil refineries, also bringing the benefits of economy of scale for the overall process.

The smaller scale of primary conversion lowers the risks of the investment, which has been the main bottleneck for large-scale biofuel plants. Integration of the primary conversion to local heat and power production is estimated to result in 80 per cent energy efficiency in biomass utilisation.

The COMSYN project validates the process concept from biomass gasification to final biofuel product. The gasification of biomass and the gas cleaning process are developed and piloted by VTT Technical Research Centre of Finland Ltd together with GKN Sinter Metals Filters.

The synthesis process utilises a modern intensified Fischer-Tropsch reactor by INERATEC GmbH and one of the key targets of the project is to further develop the technology for even higher syngas conversion. Refining of Fischer-Tropsch products to high quality drop-in liquid transport fuels is done at UniCRE, the Unipetrol Centre for Research and Education.

The process design, techno-economic and environmental assessments as well as market and business case studies are carried out by Amec Foster Wheeler Italiana, DLR German Aerospace Center and ÅF-Consult.

Related Content

  • October 22, 2014
    Using electricity to power road freight
    Next year sees the start of the first real-life electrified road system for transporting freight. Worldwide freight transportation is predicted to double by 2050 but despite expansion of global rail infrastructure only one third of this additional freight transport can be handled by trains. This means that the largest proportion of freight transport will continue to be by road and as a result, experts expect global CO2 emissions from road freight traffic to more than double by 2050.
  • June 25, 2018
    VTT’s robot car parks autonomously
    VTT Technical Research Centre of Finland’s robot car Marilyn is parking autonomously - 100m away from its driver. The trial in Tampere uses the Internet of Things (IoT) and is expected to allow vehicles to park closer together without fear of collisions at airports and shopping centres. Johan Scholliers, project manager at VTT, says the technology will also help reduce congestion in parking areas.
  • October 5, 2017
    European Commission: progress in Europe towards clean technology and alternative fuels
    Progress is being made towards implementing clean transport technologies and alternative fuels, according to a new Cleaner Transport report from European Commission, funded by Transport Research Innovation Porta (TRIP). The report also found an increase in the deployment of biofuels for road transport and that softer measures to encourage passengers to adopt lower-emission options are leaving to CO2 reductions. The Cleaner Transport report collected outcomes from over €2.8 billion worth of clean transport
  • October 20, 2016
    Researchers accidentally discover how to convert pollution into fuel
    In a new twist to waste-to-fuel technology, scientists at the US Department of Energy’s Oak Ridge National Laboratory (ORNL) have accidentally developed an electrochemical process that uses tiny spikes of carbon and copper to turn carbon dioxide, a greenhouse gas, into ethanol. The team used a catalyst made of carbon, copper and nitrogen and applied voltage to trigger a complicated chemical reaction that essentially reverses the combustion process. With the help of the nanotechnology-based catalyst which