Skip to main content

VTT participates in biofuel production technology project

The VTT Technical Research Centre of Finland is participating in the EU-funded project COMSYN, which aims to develop a production concept for competitive bio-based fuels by means of a compact gasification and synthesis process. The target reduction of the biofuel production cost is up to 35 per cent compared to alternative routes, which translates to less than 0.80 €/l production cost for diesel.
September 15, 2017 Read time: 2 mins

The VTT Technical Research Centre of Finland is participating in the EU-funded project COMSYN, which aims to develop a production concept for competitive bio-based fuels by means of a compact gasification and synthesis process. The target reduction of the biofuel production cost is up to 35 per cent compared to alternative routes, which translates to less than 0.80 €/l production cost for diesel.

The production concept is based on the distributed primary conversion of various kind of biomass residues to intermediate liquid products at small-to-medium scale (10-50 kt/a Fischer-Tropsch products, 30–150 MW biomass) units located close to biomass resources. The Fischer-Tropsch products will be upgraded to fuels in existing central oil refineries, also bringing the benefits of economy of scale for the overall process.

The smaller scale of primary conversion lowers the risks of the investment, which has been the main bottleneck for large-scale biofuel plants. Integration of the primary conversion to local heat and power production is estimated to result in 80 per cent energy efficiency in biomass utilisation.

The COMSYN project validates the process concept from biomass gasification to final biofuel product. The gasification of biomass and the gas cleaning process are developed and piloted by VTT Technical Research Centre of Finland Ltd together with GKN Sinter Metals Filters.

The synthesis process utilises a modern intensified Fischer-Tropsch reactor by INERATEC GmbH and one of the key targets of the project is to further develop the technology for even higher syngas conversion. Refining of Fischer-Tropsch products to high quality drop-in liquid transport fuels is done at UniCRE, the Unipetrol Centre for Research and Education.

The process design, techno-economic and environmental assessments as well as market and business case studies are carried out by Amec Foster Wheeler Italiana, DLR German Aerospace Center and ÅF-Consult.

Related Content

  • October 22, 2015
    LowCVP calls on truck operators and others to focus on cutting truck emissions
    To coincide with its participation in the new Freight in the City event on 27 October, the LowCVP is calling on fleet operators, local authorities and others to join forces in building the market for heavy goods vehicles which cut carbon, reduce emissions and lower fuel costs. In earlier research, the LowCVP has identified three main opportunities for cutting emissions from HGVs which pointed to the need for specific interventions: independent testing to validate the effectiveness of retrofit technology
  • February 2, 2012
    Automating seat belt compliance a priority for road safety
    Finland's VTT is developing a mobile, automated seatbelt compliance system. Here, the organisation's Matti Kutila discusses progress
  • July 4, 2013
    LowCVP study identifies cost-effective options for cutting UK bus emissions
    A new report prepared for the Low Carbon Vehicle Partnership (LowCVP) by Ricardo indicates that a wide range of innovative technologies can cut carbon emissions from buses and provide a short-term payback at current fuel prices and subsidy levels. The aim of the LowCVP study was to identify a range of low carbon fuels and technologies which can cost-effectively reduce well-to-wheel CO2 emissions for urban buses in the UK. The report developed technology roadmaps to illustrate when these technologies are lik
  • March 17, 2016
    Inland waterways can de-stress city roads
    David Crawford looks at an under-utilised solution for city-centre deliveries. The use of rivers and canals for moving freight is a well-established mode in North Western Europe, where it can take advantage of an intensively developed network. In the Netherlands, 40% of the total volume of goods transported internally goes by water; the figure for Flanders (the neighbouring Dutch-speaking region of Belgium) is 11.5%.