Skip to main content

US fuel economy for light duty vehicles 2022-2025 ‘will reduce consumption and emissions’

According to researchers at the University of Michigan, the 2022-2025 fuel-economy (CAFE) standards for light-duty vehicles, which were reaffirmed by the EPA on 30 November 2016 in the midterm evaluation of the standards, will substantially reduce future fuel consumption and emissions, even if the future vehicle mix (cars vs light trucks) does not change. However, in addition to these direct benefits, indirect benefits can also be expected via the influence of more stringent standards on the future mix o
December 16, 2016 Read time: 2 mins
According to researchers at the University of Michigan, the 2022-2025 fuel-economy (CAFE) standards for light-duty vehicles, which were reaffirmed by the EPA on 30 November 2016 in the midterm evaluation of the standards, will substantially reduce future fuel consumption and emissions, even if the future vehicle mix (cars vs light trucks) does not change.

However, in addition to these direct benefits, indirect benefits can also be expected via the influence of more stringent standards on the future mix of vehicles produced (and sold). For example, more stringent standards will likely increase pressure on automobile manufacturers to produce (and sell) vehicles with high fuel efficiency and thus increase marketing efforts (incentives, production goals, etc.) for cars (and especially small cars), which tend to be the most fuel-efficient gasoline- and diesel-powered vehicles for sale today. Thus, it is reasonable to postulate that the vehicle mix under the 2022-2025 standards will contain proportionally more cars and less light trucks than would have been the case without these standards in place. In turn, proportionally more cars among new vehicles would indirectly reduce the fuel consumption by the new-vehicle fleet.

This brief report calculated the amount of fuel consumed by different production mixes of cars and light trucks. The calculations were performed for one- and four-year periods. The results indicate, for example, that if the production mix were to stay the same as the model year 2015 mix of 57.4 per cent cars and 42.6 per cent light trucks, compared to a possible mix of 40 per cent cars and 60 per cent light trucks without the new 2022-2025 standards, the fuel saved by the new vehicles during the first four years would amount to 3.3 billion gallons of fuel.

Related Content

  • New York Citi Bike pilots laser safety light
    January 16, 2017
    As part of an ongoing commitment to safer cycling in New York, the Citi Bike program is installing a new safety feature, the Blaze Laserlight, on 250 bikes this winter, with the aim of making Citi Bike riders more visible to drivers and pedestrians. The light uses laser technology to project a bike symbol six metres in front of the rider and, unlike the standard beam of bike lights, is visible from various perspectives. According to Citi Bike, research on use of the Laserlight on London’s bike share f
  • Omnitracs partners with Drivewyze on weigh station bypass services
    December 3, 2015
    Fleet management solutions provider Omnitracs has partnered with Drivewyze to equip Omnitracs mobile computing platforms with its PreClear Weigh Station Bypass services. Drivewyze uses GPS technology and the mobile internet instead of traditional battery-operated transponders to add transponder-like functionality to electronic logging devices (ELDs). The Drivewyze service is available at 611 fixed weigh stations and mobile inspection sites throughout 35 US states, meaning it provides bypasses at more locati
  • High-speed WIM moves onto the main highway
    May 24, 2016
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
  • Red light cameras ‘reducing intersection deaths’ in Toronto
    September 4, 2017
    The city of Toronto, Canada has seen an average drop of 40 per cent in the number of collisions causing a death or serious injury at intersections equipped with red light cameras, according to the Toronto Star. At some locations, there have been no deaths or serious injuries caused by collisions since the cameras were installed.The city has almost doubled its red light cameras as part of a plan it says is aimed at eliminating traffic death and serious injuries.