Skip to main content

UK well positioned to benefit from autonomous lorries, says Inrix

Driver shortage, commercially-viable roads and Brexit uncertainty position the UK to develop and benefit from autonomous freighting, says Inrix. The analytics company's latest report has identified the A1 from Sheffield to Edinburgh as the most suitable corridor for testing highly automated vehicles (HAV). The Inrix Automated Freight Corridor Assessment reveals the next best-suited corridor is the M5/A38 from Plymouth to Birmingham, followed by the M4 from Swindon to Swansea.
September 24, 2018 Read time: 2 mins
Driver shortage, commercially-viable roads and Brexit uncertainty position the UK to develop and benefit from autonomous freighting, says 163 Inrix. The analytics company's latest %$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external report false http://inrix.com/press-releases/automated-freight-uk/ false false%> has identified the A1 from Sheffield to Edinburgh as the most suitable corridor for testing highly automated vehicles (HAV).


The Inrix Automated Freight Corridor Assessment reveals the next best-suited corridor is the M5/A38 from Plymouth to Birmingham, followed by the M4 from Swindon to Swansea.

Inrix believes a successful deployment of autonomous lorries could address the shortage of qualified HGV drivers in the UK and the uncertainty of freedom of movement after Brexit.  

The company refers to a %$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external report false https://fta.co.uk/compliance-and-advice/economy/skills-shortage/skills-shortage false false%> by the 6983 Freight Transport Association, which confirmed a lack of 52,000 qualified HGV lorry operators in the UK during 2017, with 14% of the workforce consisting of EU nationals.

Avery Ash, autonomous vehicle market strategist at Inrix, says HAVs require smart planning to prevent them from clogging roads, increasing pollution and presenting safety issues.

“Fortunately, our data analysis shows that there are a range of roads in the UK that are both suitable and commercially viable for trial and initial deployment of autonomous freight vehicles,” Ash adds.

Inrix ranked the M6 from Manchester to Glasgow, stretching nearly 215 miles, as the most feasible route for commercial returns due to low congestion. It is followed by the A1 from Sheffield to Edinburgh and then by the M5/A38 from Plymouth to Birmingham.

According to Inrix, the M25 circling London is the top corridor which requires safety improvements due to its levels of dangerous slowdown incidents per mile. The M6 from Coventry to Manchester comes in at second place, followed by and the M5/A38 from Plymouth to Birmingham.

Related Content

  • NOCoE opens submissions for TSMO Awards
    September 10, 2019
    The US National Operations Center of Excellence (NOCoE) is accepting submissions for the second Transportation Systems Management and Operations (TSMO) Awards. The TSMO awards celebrate transportation management and operations that save lives, time and money. Judges will select a winner and runner-up from the following: •Best TSMO Project (Creative Solution) – A successful project, planning or response to a specific event, or other improvement for safety, congestion and/or travel time reliability. Thes
  • Kapsch to deploy tolling roadside systems in Australia
    December 17, 2018
    Kapsch TrafficCom Australia is to deliver a tolling roadside system for two projects in Melbourne and Sydney for a combined value of AUD$30 million (£17m). In Melbourne, Kapsch’s tolling technology will be utilised in the West Gate Tunnel Project, an initiative which seeks to establish a second river crossing in the city and remove thousands of trucks from residential streets. Part of an agreement between two contractors: CPB Contractors John Holland Joint Venture (CPBJH JV), the full scope of the contr
  • Special ACEM-Rail sessions at ETC 2013
    August 16, 2013
    The European Transport Conference moves to its new home of Goethe University in Frankfurt for 2013’s event on 30 September - 2 October. Special sessions on the Automated and Cost Effective Maintenance for Railway (ACEM-Rail) project will take place on 30 September, looking at ACEM-Rail instrumentation and ACEM-Rail infrastructure management ACEM-Rail is an FP7 project which runs through 2010-2013. The final goal is to reduce the costs and the interaction of maintenance operations with railway services as w
  • A view of mobility for the next generation
    March 10, 2017
    We wanted to know what mobility will look like for the next generation, so we asked those who would be shaping and using it – the next generation themselves. A group of students studying under Professor Dr Regine Gerike at Technical University Dresden gave us a wide range of stimulating responses. See our website for the full discussion: