Skip to main content

TRL aids Highways Agency with M2 motorway hole investigation

The UK’s transport research Laboratory (TRL) provided a rapid response when asked for help as part of the investigation of the recent appearance of a hole in the central reservation of the M2 between junctions 5 near Sittingbourne and 6, near Faversham. The hole that appeared is believed to be a dene hole; an historic man made hole which may have been used to mine for chalk hundreds of years ago. The hole was filled in when the M2 was constructed, but recent wet weather contributed to the destabilisati
February 21, 2014 Read time: 2 mins
The UK’s transport research Laboratory (491 TRL) provided a rapid response when asked for help as part of the investigation of the recent appearance of a hole in the central reservation of the M2 between junctions 5 near Sittingbourne and 6, near Faversham.  

The hole that appeared is believed to be a dene hole; an historic man made hole which may have been used to mine for chalk hundreds of years ago. The hole was filled in when the M2 was constructed, but recent wet weather contributed to the destabilisation of the ground, causing the hole to appear.

Within a few hours of being asked for assistance, TRL was able to mobilise a team to be on site to provide two coring rigs and staff to undertake investigations of the carriageway in one lane either side of the hole to establish its integrity. The carriageway is constructed of jointed reinforced concrete with a thick asphalt overlay.

Two TRL teams working round the clock cored approximately 38 holes to help determine the extent of the problem.

The 503 Highways Agency has now stabilised the hole with forty tonnes of pea shingle and further geotechnical investigations by TRL confirm that the ground beneath the M2 is safe for traffic to use.

Further resurfacing work has finished, with all lanes now re-opened, nine days after the 15ft deep hole swallowed up the road surface.

For more information on companies in this article

Related Content

  • Roadside monitoring used to target non-compliant trucks
    March 9, 2016
    The UK’s DVSA is utilising existing technology to identify non-compliant commercial vehicles and target repeat offenders while avoiding law-abiding companies. Enforcing the compliance of commercial vehicles (goods vehicles over 3.5 tonnes and vehicles with eight or more passenger seats) on the UK’s roads is the responsibility of the DVSA (the Driver and Vehicle Standards Agency). The Department for Transport created the executive agency about 18 months ago by merging the Driving Standards Agency (DSA) and t
  • Global navigation reference point to test zero emission driverless vehicles
    December 4, 2014
    A successful consortium led by the UK’s Transport research Laboratory (TRL) has been selected by Innovate UK to deliver the GATEway project (Greenwich Automated Transport Environment), one of three projects awarded to test driverless vehicles in UK urban locations. The US$12.5 million project will see three trials of different types of zero emission automated vehicles within an innovative, technology-agnostic testing environment set in the Royal Borough of Greenwich. The ‘prime meridian’ was establi
  • Kapsch wooden gantry installed on Austrian highway
    July 18, 2024
    Renewable timber construction means Asfinag installation 'saves 15 tonnes of CO2'
  • ‘What’s the optimum number of cooks?’ asks Valerann
    October 23, 2023
    ITS Software as a Service specialist explains in detail how cross-source, cross-type, deep data fusion is solving global traffic accident conundrums