Skip to main content

Traffic Data Systems wins Hamburg bridge WiM deal

Köhlbrand Bridge across River Elbe is second-longest in Germany
By Adam Hill March 20, 2025 Read time: 2 mins
Fifty years of heavy traffic 'have taken their toll' (© Wirestock | Dreamstime.com)

Traffic Data Systems has been awarded a bridge Weigh in Motion contract from the Hamburg Port Authority (HPA) in northern Germany.

The Köhlbrand Bridge across the River Elbe is one of the most important transport links in the port of Hamburg.

"Fifty years of heavy traffic have taken their toll on this bridge," explains Traffic Data Systems founder Florian Weiss.

"Today not only significantly more - but also significantly heavier - vehicles pass the bridge than planned. That's 38,000 vehicles per day, 43% of which are heavy goods vehicles, so extensive renovation work has already been necessary several times."

The HPA put a WiM system out to tender for the first time in 2010; this was supplied by Traffic Data Systems and operated for several years. Just a few weeks after it went into operation, a ban on lorries overtaking was imposed and the maximum permitted speed was reduced from 80 km/h to 60 km/h.

At the end of 2024, the HPA put the renewal of the WiM system out to tender - and this was also won by Traffic Data Systems at the beginning of 2025.

Its WiM technology fulfills the requirements of OIML R134. In addition to overview and ANPR cameras, scanners that graphically display the profile of the vehicles will also be supplied. Construction of the WiM system is planned for summer this year.

The reinforced concrete and prestressed concrete structure/steel cable-stayed bridge was opened in 1974. At 3,618m long, 135m high (clearance height 53m), it is Germany's second-longest bridge.

Köhlbrand Bridge's elegant and unique design has made it an official cultural monument of the city of Hamburg. 

Related Content

  • April 20, 2017
    Agencies in pursuit of high-speed WIM accuracy
    Alan Dron looks at where WIM is heading in the near future. As Weigh-In-Motion (WIM) systems grow in sophistication and accuracy, they are increasingly being used in more active roles to help ensure road safety through enforcement action against overweight vehicles.
  • September 7, 2020
    Tattile part of Genoa bridge warning system 
    WiM sensor and camera combination designed to prevent repeat of 2018's fatal collapse
  • September 29, 2020
    IRD wins $3.3m Ukraine WiM deal
    Pilot project found over 40% of country's commercial vehicles overloaded
  • September 6, 2017
    Remote remedies help US authorities identify bridge deficiencies
    Every day 185 million vehicles – cars, trucks, school buses, emergency response units - cross one or more of America’s 55,710 'structurally compromised' steel and concrete road bridges, the highest concentration of which are in Iowa (nearly 5,000), Pennsylvania and Oklahoma. Nearly 2,000 of these crossings are located on interstate highways, according to the American Road and Transportation Builders Association's recent analysis of the US Department of Transportation's 2016 National Bridge Inventory.