Skip to main content

Study looks at air quality impacts of low carbon buses

A new report prepared by Ricardo for the Low Carbon Vehicle Partnership (LowCVP) to review the air quality impacts arising from the recent rapid increase in the number of low carbon buses in the UK recommends that the legislation needs to consider hybrid technology impacts in the test processes to avoid potential unintended consequences in terms of local emissions. As they mainly operate in urban areas, local emissions from buses are of particular significance. Reviewing worldwide test processes for
December 11, 2013 Read time: 3 mins
RSSA new report prepared by 5606 Ricardo for the Low Carbon Vehicle Partnership (LowCVP) to review the air quality impacts arising from the recent rapid increase in the number of low carbon buses in the UK recommends that the legislation needs to consider hybrid technology impacts in the test processes to avoid potential unintended consequences in terms of local emissions.

As they mainly operate in urban areas, local emissions from buses are of particular significance.

Reviewing worldwide test processes for HGV engines, the report says that Euro VI (EPA10 in USA) emissions levels for diesel and gas engines should be broadly indistinguishable (within measurement error) and that levels emitted from both engine types will be very low.

However, the limited whole vehicle test data available to the researchers showed that the real world improvements in regulated emissions often don’t match the expectations from legislative tests due to the operating cycles of engines on the road.

The most robust data available (supplied by 1466 Transport for London’s bus fleet) showed that carbon emissions, fuel consumption and local air quality emissions were reduced for the low carbon vehicles compared with conventional buses.  However, using an alternative metric of emissions intensity, in some cases the hybrid vehicles showed higher emission levels per unit of fuel burned than conventional buses indicating, researchers said, that there is further scope to optimise emissions control and after-treatment systems around the operating cycle.

The study says that technologies such as hybridisation offer the prospect of significant reductions in fuel consumption and CO2 emissions compared to conventionally powered vehicles, but the improvement in terms of regulated emissions may not be as great.  

The researchers recommend, however, that consideration of hybrid technologies in the legislative test cycle is needed to facilitate further air quality reduction. It is also recommended that buses - both conventional and hybridised, and both fossil and alternatively fuelled – should be optimised over drive cycles more directly representative of their operational use.

The report also notes that unregulated emissions remain a concern to legislators and are likely to become regulated over time where they are seen to have an air quality impact. Unregulated emissions of current concern are: ammonia, N2O/NO2, benzene (from diesels) and methane, ammonia and aldehydes (from gas engines).

Commenting on the research, the LowCVP’s managing director, Andy Eastlake said: “The primary focus of our work has been, and will remain, the reduction of carbon and greenhouse gas emissions to mitigate climate change. It’s important, though, that we always keep an eye on other effects of the low carbon shift, including any impacts on local air quality.  

“Using appropriate test methods for every new technology and application, such as the process we have implemented for the low carbon bus will help us make sure that low carbon is in all ways low emission.”

Says Dave Greenwood, head of the Ricardo hybrid and electric systems product group, “Urban air quality is a significant issue for many towns and cities worldwide, alongside wider national and international concerns regarding carbon dioxide emissions.  The hybridisation of bus fleet powertrains offers a potential means of reducing fuel consumption and CO2 emissions but as this research highlights, it is important that such low carbon technologies are applied in an optimal manner, taking account of real-world duty cycles in order to ensure that all regulated pollutants - including those of carbon dioxide - are kept as low as possible."

Related Content

  • January 7, 2022
    Maryland targets 2030 e-bus transition
    Maryland DoT MTA to change 50% of diesel/hybrid buses to zero-emission in next eight years
  • May 1, 2015
    For better air quality ‘cities need to turn to gas powered trucks and buses’
    The UK’s cities are under unprecedented pressure to improve air quality, as Supreme Court justices in London order that air quality plans to comply with European Union (EU) law on limits for nitrogen dioxide (NOx) in the air must be submitted to the European Commission no later than 31 December 2015. The case was brought by ClientEarth, a group of lawyers dedicated to environmental issues, which says the ruling means the Government must start work on a comprehensive plan to meet pollution limits as soon
  • March 24, 2016
    Report highlights positive effects of US diesel emissions reduction program
    Clean diesel grants aimed at cleaning up old diesel engines have greatly improved public health by cutting harmful pollution that causes premature deaths, asthma attacks and missed school and workdays, according to a new report by the US Environmental Protection Agency (EPA). Since its start in 2008, the Diesel Emission Reduction Act (DERA) program has significantly improved air quality for communities across the country by retrofitting and replacing older diesel engines. Diesel exhaust significantly con
  • February 15, 2017
    Automotive OEMs standardise testing to comply with RDE deadlines, say researchers
    Following 'dieselgate', the previously lax automobile emission testing procedures tightened and all European original equipment manufacturers (OEMs) are now required to implement real driving emissions (RDE). In September, RDE testing will have a conformity factor of 2.1, which will change to 1.5 by September 2021. OEMs will be more transparent with their testing methods and results. After the implementation of RDE, adoption of World Harmonisation Light Vehicle Test Procedure (WLTP) will be simpler. The